Part Details for REF192 by Analog Devices Inc
Overview of REF192 by Analog Devices Inc
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 crosses)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 crosses)
- Part Data Attributes: (Available)
- Reference Designs: (Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Part Details for REF192
REF192 CAD Models
REF192 Part Data Attributes:
|
|
REF192
Analog Devices Inc
Buy Now
|
Compare Parts:
REF192
Analog Devices Inc
|
| Samacsys Manufacturer | Analog Devices |
Resources and Additional Insights for REF192
Reference Designs related to REF192
-
CN0183 - Precision 16-Bit, Bipolar Output Voltage Source with +12 V to ±5 V Supply
The AD5668 is a 16-bit, octal, voltage output denseDAC controlled by an SPI interface. It contains an on-chip reference with a 10 ppm/°C maximum drift specification. The on-chip reference is off at power-up, allowing the use of an external reference. The internal reference is enabled via a software write. In This circuit , an external REF192 is used because a low output impedance is required to drive the 2.5 V pseudo ground reference for the AD8638 op amps.
-
TIDA-01444 适用于服务器 PSU 的 180W、双通道、效率为 97% 的降压转换器参考设计
TIDA-01444 参考设计应用了具有符合法规的 12V 直流输入电压的 180W 降压、双通道直流/直流转换器，旨在为终端负载电压提供 97% 以上的效率和良好的热性能，适用于服务器 PSU、PC PSU 以及其他降压转换器应用。可轻松实现双通道开关频率同步。双输出的真差动遥感可补偿线路压降，为终端负载提供更精确的电压。为了提高功率密度并减小厚度，此集成电路参考设计使用平面电感器代替传统的离散电感器。此 TI 参考设计具有全面保护和温度传感功能。
-
Low-Drift Bidirectional Single-Supply Low-Side Current Sensing Reference Design
This Verified TI Precision Design implements a low-drift: bi-directional: low-side: single-supply current sensing solution that measures load currents from -2.5 A to +2.5 A. The output range is from 250 mV to 2.75 V: with 0 A current centered at 1.5 V. To achieve low-drift performance: the solution utilizes the INA213B and REF2030. The design’s functionality and performance were verified by fabricating a PCB and measuring results over temperature from -40 °C to 125 °C.