Part Details for VND810SP by STMicroelectronics
Results Overview of VND810SP by STMicroelectronics
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Transportation and Logistics
Automotive
VND810SP Information
VND810SP by STMicroelectronics is a Peripheral Driver.
Peripheral Drivers are under the broader part category of Drivers And Interfaces.
A driver controls the current or voltage delivered to components like LCDs or motors, while an interface component connects systems for data transfer and control. Read more about Drivers And Interfaces on our Drivers And Interfaces part category page.
Price & Stock for VND810SP
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Component Electronics, Inc | IN STOCK SHIP TODAY | 15 |
|
$5.0000 / $7.6900 | Buy Now |
Part Details for VND810SP
VND810SP CAD Models
VND810SP Part Data Attributes
|
|
VND810SP
STMicroelectronics
Buy Now
Datasheet
|
Compare Parts:
VND810SP
STMicroelectronics
5A BUF OR INV BASED PRPHL DRVR, PDSO10, ROHS COMPLIANT, POWER, SO-10
Select a part to compare: |
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | STMICROELECTRONICS | |
| Part Package Code | SOIC | |
| Package Description | ROHS COMPLIANT, POWER, SO-10 | |
| Pin Count | 10 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE | |
| Driver Number of Bits | 2 | |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER | |
| JESD-30 Code | R-PDSO-G10 | |
| JESD-609 Code | e3 | |
| Length | 9.4 mm | |
| Number of Functions | 1 | |
| Number of Terminals | 10 | |
| Output Current Flow Direction | SINK | |
| Output Peak Current Limit-Nom | 5 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HSOP | |
| Package Equivalence Code | SOP10,.55FL | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 3.75 mm | |
| Supply Voltage-Max | 36 V | |
| Supply Voltage-Min | 5.5 V | |
| Supply Voltage-Nom | 13 V | |
| Surface Mount | YES | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 7.5 mm |
Alternate Parts for VND810SP
This table gives cross-reference parts and alternative options found for VND810SP. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of VND810SP, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| VND810SPTR-E | STMicroelectronics | Check for Price | DOUBLE CHANNEL HIGH SIDE DRIVER | VND810SP vs VND810SPTR-E |
VND810SP Frequently Asked Questions (FAQ)
-
The maximum current rating of the VND810SP is 1.5A per channel, with a maximum total current of 3A.
-
The VND810SP can be configured for half-bridge or full-bridge operation by connecting the appropriate pins and setting the enable inputs (EN) accordingly. Refer to the application note AN2153 for detailed configuration guidelines.
-
The minimum input voltage required for the VND810SP is 5.5V, with a recommended operating range of 6V to 18V.
-
The VND810SP has built-in overcurrent protection and thermal shutdown. Additionally, external protection circuits can be implemented using sense resistors and a comparator to detect overcurrent conditions.
-
Yes, the VND810SP is suitable for high-frequency applications up to 100 kHz, but the maximum frequency depends on the specific application and PCB layout. Refer to the datasheet and application notes for guidance on high-frequency design considerations.