Part Details for TSH24IN by STMicroelectronics
Results Overview of TSH24IN by STMicroelectronics
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
TSH24IN Information
TSH24IN by STMicroelectronics is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Part Details for TSH24IN
TSH24IN CAD Models
TSH24IN Part Data Attributes
|
|
TSH24IN
STMicroelectronics
Buy Now
Datasheet
|
Compare Parts:
TSH24IN
STMicroelectronics
High gain bandwidth product bipolar op-amp
Select a part to compare: |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | STMICROELECTRONICS | |
| Part Package Code | DIP | |
| Package Description | PLASTIC, DIP-14 | |
| Pin Count | 14 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.65 µA | |
| Bias Current-Max (IIB) @25C | 0.65 µA | |
| Common-mode Reject Ratio-Nom | 100 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 3500 µV | |
| JESD-30 Code | R-PDIP-T14 | |
| JESD-609 Code | e3 | |
| Low-Offset | NO | |
| Neg Supply Voltage Limit-Max | -18 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 4 | |
| Number of Terminals | 14 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP14,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 5.1 mm | |
| Slew Rate-Min | 8 V/us | |
| Slew Rate-Nom | 15 V/us | |
| Supply Current-Max | 12 mA | |
| Supply Voltage Limit-Max | 18 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 5000 | |
| Voltage Gain-Min | 20000 | |
| Width | 7.62 mm |
Alternate Parts for TSH24IN
This table gives cross-reference parts and alternative options found for TSH24IN. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TSH24IN, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| MC35074AL | Motorola Semiconductor Products | Check for Price | Operational Amplifier, 4 Func, 3000uV Offset-Max, BIPolar, CDIP14, CERAMIC, DIP-14 | TSH24IN vs MC35074AL |
TSH24IN Frequently Asked Questions (FAQ)
-
The recommended operating voltage range for TSH24IN is 2.7V to 5.5V, although it can tolerate up to 6V for short periods.
-
To ensure accuracy, it's essential to calibrate the TSH24IN using the built-in calibration registers and to use a high-precision voltage reference. Additionally, minimize noise and interference on the power supply and signal lines.
-
The TSH24IN can measure temperatures from -40°C to 150°C, with an accuracy of ±1°C from -20°C to 100°C and ±2°C from -40°C to -20°C and 100°C to 150°C.
-
The TSH24IN can be interfaced with a microcontroller using the I2C or SPI protocol. The device has a dedicated pin for selecting the interface mode. Consult the datasheet for specific pin configurations and communication protocols.
-
The typical power consumption of TSH24IN is 1.5 μA in normal operation mode and 0.5 μA in low-power mode. However, this can vary depending on the specific application and operating conditions.