Part Details for ST72F521AR9TC by STMicroelectronics
Results Overview of ST72F521AR9TC by STMicroelectronics
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Industrial Automation
Renewable Energy
Automotive
Robotics and Drones
ST72F521AR9TC Information
ST72F521AR9TC by STMicroelectronics is a Microcontroller.
Microcontrollers are under the broader part category of Microcontrollers and Processors.
Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.
Part Details for ST72F521AR9TC
ST72F521AR9TC CAD Models
ST72F521AR9TC Part Data Attributes
|
|
ST72F521AR9TC
STMicroelectronics
Buy Now
Datasheet
|
Compare Parts:
ST72F521AR9TC
STMicroelectronics
8-bit MCU for automotive
Select a part to compare: |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | STMICROELECTRONICS | |
| Part Package Code | QFP | |
| Package Description | 10 X 10 MM, ROHS COMPLIANT, LQFP-64 | |
| Pin Count | 64 | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.31.00.01 | |
| Has ADC | YES | |
| Address Bus Width | ||
| Bit Size | 8 | |
| Boundary Scan | NO | |
| CPU Family | ST72 | |
| Clock Frequency-Max | 16 MHz | |
| DAC Channels | NO | |
| DMA Channels | NO | |
| External Data Bus Width | ||
| JESD-30 Code | S-PQFP-G64 | |
| JESD-609 Code | e4 | |
| Length | 10 mm | |
| Number of I/O Lines | 48 | |
| Number of Terminals | 64 | |
| Number of Timers | 5 | |
| On Chip Program ROM Width | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| PWM Channels | YES | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | LFQFP | |
| Package Equivalence Code | QFP64,.47SQ,20 | |
| Package Shape | SQUARE | |
| Package Style | FLATPACK, LOW PROFILE, FINE PITCH | |
| Qualification Status | Not Qualified | |
| RAM (bytes) | 2048 | |
| ROM (words) | 61440 | |
| ROM Programmability | FLASH | |
| Seated Height-Max | 1.6 mm | |
| Speed | 8 MHz | |
| Supply Current-Max | 15 mA | |
| Supply Voltage-Max | 5.5 V | |
| Supply Voltage-Min | 3.8 V | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | NICKEL PALLADIUM GOLD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Width | 10 mm | |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
ST72F521AR9TC Frequently Asked Questions (FAQ)
-
The recommended operating voltage range for ST72F521AR9TC is 4.5V to 5.5V, with a typical voltage of 5V.
-
The clock source for ST72F521AR9TC can be configured using the Clock Control Register (CKCU). You can choose between an internal clock, an external clock, or a clock generated by the internal RC oscillator.
-
The maximum clock frequency supported by ST72F521AR9TC is 24 MHz.
-
The ST72F521AR9TC has a built-in watchdog timer that can be enabled and configured using the Watchdog Timer Control Register (WDTC). You can set the watchdog timer period and enable or disable it as needed.
-
The Reset Pin (RST) on ST72F521AR9TC is an active-low input that resets the microcontroller when it is driven low. It can be used to reset the device in case of a fault or to initialize it during power-up.