Part Details for TPS75725KTTR by Texas Instruments
Results Overview of TPS75725KTTR by Texas Instruments
- Distributor Offerings: (8 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
TPS75725KTTR Information
TPS75725KTTR by Texas Instruments is a Linear Regulator IC.
Linear Regulator ICs are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for TPS75725KTTR
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
2156-TPS75725KTTR-ND
|
DigiKey | IC REG LINEAR 2.5V 3A TO263 Min Qty: 1 Lead time: 6 Weeks Container: Bulk MARKETPLACE PRODUCT |
22006 In Stock |
|
$5.0300 | Buy Now |
|
DISTI #
296-TPS75725KTTRCT-ND
|
DigiKey | IC REG LINEAR 2.5V 3A TO263 Min Qty: 1 Lead time: 6 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) | Temporarily Out of Stock |
|
$5.0086 / $7.4900 | Buy Now |
|
DISTI #
595-TPS75725KTTR
|
Mouser Electronics | LDO Voltage Regulators 2.5 Volt Output 3A A 595-TPS75725KTTT RoHS: Compliant | 406 |
|
$4.9300 / $8.9900 | Buy Now |
|
DISTI #
86291702
|
Verical | LDO Regulator Pos 2.5V 3A 6-Pin(5+Tab) DDPAK T/R RoHS: Compliant Min Qty: 62 Package Multiple: 1 | Americas - 21876 |
|
$6.0500 | Buy Now |
|
|
Bristol Electronics | 28 |
|
RFQ | ||
|
|
Quest Components | FIXED POSITIVE LDO REGULATOR, 2.5V, 0.3V DROPOUT, PMOS, PSSO5 | 22 |
|
$8.0000 / $12.0000 | Buy Now |
|
|
Quest Components | FIXED POSITIVE LDO REGULATOR, 2.5V, 0.3V DROPOUT, PMOS, PSSO5 | 5 |
|
$4.4663 / $8.9325 | Buy Now |
|
|
Rochester Electronics | TPS757 Fast-Transient Response, 3-A, Low-Dropout Voltage Regulators RoHS: Compliant Status: Active Min Qty: 1 | 22006 |
|
$3.8700 / $4.8400 | Buy Now |
Part Details for TPS75725KTTR
TPS75725KTTR CAD Models
TPS75725KTTR Part Data Attributes
|
|
TPS75725KTTR
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
TPS75725KTTR
Texas Instruments
3-A, ultra-low-dropout voltage regulator with power good & enable 5-DDPAK/TO-263 -40 to 125
Select a part to compare: |
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | D2PAK | |
| Package Description | TO-263, D2PAK-5 | |
| Pin Count | 4 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Texas Instruments | |
| Adjustability | FIXED | |
| Dropout Voltage1-Max | 0.3 V | |
| Dropout Voltage1-Nom | 0.15 V | |
| Input Voltage Absolute-Max | 6 V | |
| Input Voltage-Max | 5.5 V | |
| Input Voltage-Min | 2.8 V | |
| JESD-30 Code | R-PSSO-G5 | |
| JESD-609 Code | e3 | |
| Length | 10.16 mm | |
| Line Regulation-Max | 0.00675% | |
| Moisture Sensitivity Level | 2 | |
| Number of Functions | 1 | |
| Number of Outputs | 1 | |
| Number of Terminals | 5 | |
| Operating Temperature TJ-Max | 125 °C | |
| Operating Temperature TJ-Min | -40 °C | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current1-Max | 3 A | |
| Output Voltage1-Max | 2.575 V | |
| Output Voltage1-Min | 2.425 V | |
| Output Voltage1-Nom | 2.5 V | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TO-263 | |
| Package Equivalence Code | SMSIP5H,.6,67TB | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Regulator Type | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | |
| Seated Height-Max | 4.83 mm | |
| Surface Mount | YES | |
| Technology | PMOS | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.7 mm | |
| Terminal Position | SINGLE | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Voltage Tolerance-Max | 3% | |
| Width | 8.51 mm |
Alternate Parts for TPS75725KTTR
This table gives cross-reference parts and alternative options found for TPS75725KTTR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TPS75725KTTR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| TPS75725KTTTG3 | Texas Instruments | Check for Price | Fast-Transient Response, 3-A, Low-Dropout Voltage Regulators 5-DDPAK/TO-263 | TPS75725KTTR vs TPS75725KTTTG3 |
| TPS75725KTTRG3 | Texas Instruments | Check for Price | 3-A, ultra-low-dropout voltage regulator with power good & enable 5-DDPAK/TO-263 -40 to 125 | TPS75725KTTR vs TPS75725KTTRG3 |
TPS75725KTTR Frequently Asked Questions (FAQ)
-
The recommended input capacitor value is 1uF to 10uF, depending on the input voltage and output current requirements. A larger capacitor can help reduce input voltage ripple and improve overall performance.
-
To ensure stability, follow the recommended PCB layout guidelines, use a low-ESR output capacitor (e.g., ceramic or polymer), and add a 10nF to 100nF capacitor between the VOUT and GND pins to filter out high-frequency noise.
-
The maximum output current is 2.5A, but it's recommended to derate the output current based on the ambient temperature and input voltage to ensure reliable operation and prevent overheating.
-
The TPS75725KTTR is rated for operation up to 125°C, but the output current and voltage regulation may degrade at higher temperatures. It's essential to consider the thermal design and heat dissipation in your application.
-
The output voltage can be adjusted by connecting a resistor divider network between the VOUT and ADJ pins. The recommended resistor values are R1 = 1kΩ to 10kΩ and R2 = 1kΩ to 10kΩ, depending on the desired output voltage.