Datasheets
TPS43060RTER by: Texas Instruments

Low Iq, 58V, Synchronous Boost Controller w/ Wide Input Voltage & 7.5V Gate Drive for Standard FETs 16-WQFN -40 to 150

Part Details for TPS43060RTER by Texas Instruments

Results Overview of TPS43060RTER by Texas Instruments

Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.

Applications Industrial Automation Energy and Power Systems Renewable Energy Automotive

TPS43060RTER Information

TPS43060RTER by Texas Instruments is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.

A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.

Available Datasheets

Part # Manufacturer Description Datasheet
TPS43060RTER Texas Instruments Low Iq, 58V, Synchronous Boost Controller w/ Wide Input Voltage & 7.5V Gate Drive for Standard FETs 16-WQFN -40 to 150

Price & Stock for TPS43060RTER

Part # Distributor Description Stock Price Buy
DISTI # 296-39400-1-ND
DigiKey IC REG CTRLR BOOST 16WQFN Min Qty: 1 Lead time: 6 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) 7695
In Stock
  • 1 $2.4900
  • 10 $1.8480
  • 25 $1.6884
  • 100 $1.5128
  • 250 $1.4292
  • 500 $1.3788
  • 1,000 $1.3373
  • 3,000 $1.2860
  • 6,000 $1.2609
$1.2609 / $2.4900 Buy Now
DISTI # 595-TPS43060RTER
Mouser Electronics Switching Controllers Sync Boost Cntlr Wid e Input Vtg A 595-TPS43060RTET RoHS: Compliant 3753
  • 1 $2.4900
  • 10 $1.6900
  • 100 $1.5200
  • 250 $1.4300
  • 500 $1.3800
  • 1,000 $1.3400
  • 3,000 $1.2300
$1.2300 / $2.4900 Buy Now
DISTI # TPS43060RTER
TME PMIC, DC/DC converter, Uin: 4.5÷38V, 4.5÷60VDC, WQFN16, SMD, Ch: 1 Min Qty: 1 0
  • 1 $2.5000
  • 5 $2.2500
  • 25 $1.9900
  • 100 $1.7900
  • 500 $1.6700
$1.6700 / $2.5000 RFQ
DISTI # SMC-TPS43060RTER
Sensible Micro Corporation Ic Reg Ctrlr Boost 16Wqfn RoHS: Compliant Min Qty: 25 Lead time: 0 Weeks, 1 Days Date Code: 22+ 0
  • 100 $0.9067
  • 500 $0.8835
  • 1,000 $0.8370
$0.8370 / $0.9067 RFQ
LCSC Boost type 4.5V38V WQFN-16-EP(3x3) DC-DC Converters ROHS 2780
  • 1 $1.5595
  • 10 $1.3096
  • 30 $1.1723
  • 100 $1.0181
  • 500 $0.9487
  • 1,000 $0.9178
$0.9178 / $1.5595 Buy Now
Win Source Electronics IC REG CTRLR BOOST 16WQFN 60000
  • 30 $1.8281
  • 70 $1.5000
  • 105 $1.4532
  • 145 $1.4063
  • 185 $1.3594
  • 250 $1.2188
$1.2188 / $1.8281 Buy Now

Part Details for TPS43060RTER

TPS43060RTER CAD Models

TPS43060RTER Part Data Attributes

TPS43060RTER Texas Instruments
Buy Now Datasheet
Compare Parts:
TPS43060RTER Texas Instruments Low Iq, 58V, Synchronous Boost Controller w/ Wide Input Voltage & 7.5V Gate Drive for Standard FETs 16-WQFN -40 to 150
Select a part to compare:
Pbfree Code Yes
Rohs Code Yes
Part Life Cycle Code Active
Ihs Manufacturer TEXAS INSTRUMENTS INC
Package Description WQFN-16
Reach Compliance Code compliant
ECCN Code EAR99
HTS Code 8542.39.00.01
Samacsys Manufacturer Texas Instruments
Additional Feature OPERATES IN ADJUSTABLE MODE FROM 4.5 V TO 58 V
Analog IC - Other Type SWITCHING CONTROLLER
Control Mode CURRENT-MODE
Control Technique PULSE WIDTH MODULATION
Input Voltage-Max 40 V
Input Voltage-Min 4.5 V
Input Voltage-Nom 12 V
JESD-30 Code S-PQCC-N16
JESD-609 Code e4
Length 3 mm
Moisture Sensitivity Level 2
Number of Functions 1
Number of Outputs 1
Number of Terminals 16
Operating Temperature-Max 150 °C
Operating Temperature-Min -40 °C
Output Current-Max 20 A
Output Voltage-Max 60 V
Output Voltage-Min 4.5 V
Package Body Material PLASTIC/EPOXY
Package Code HVQCCN
Package Equivalence Code LCC16,.12SQ,20
Package Shape SQUARE
Package Style CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Cel) 260
Qualification Status Not Qualified
Seated Height-Max 0.8 mm
Surface Mount YES
Switcher Configuration BUCK-BOOST
Switching Frequency-Max 1000 kHz
Temperature Grade AUTOMOTIVE
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Form NO LEAD
Terminal Pitch 0.5 mm
Terminal Position QUAD
Time@Peak Reflow Temperature-Max (s) 30
Width 3 mm

Alternate Parts for TPS43060RTER

This table gives cross-reference parts and alternative options found for TPS43060RTER. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TPS43060RTER, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

Part Number Manufacturer Composite Price Description Compare
ISL78225ANEZ-T Renesas Electronics Corporation Check for Price 4-Phase Interleaved Boost PWM Controller with Light Load Efficiency Enhancement, TQFP-EP, /Reel TPS43060RTER vs ISL78225ANEZ-T

TPS43060RTER Related Parts

TPS43060RTER Frequently Asked Questions (FAQ)

  • A good PCB layout for the TPS43060RTER involves placing the input capacitors close to the VIN pin, using a solid ground plane, and keeping the high-current paths short and wide. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.

  • When selecting an inductor for the TPS43060RTER, consider the inductor's saturation current, DC resistance, and core material. A good starting point is to choose an inductor with a saturation current rating of at least 1.5 times the maximum output current, and a DC resistance of less than 100 mΩ.

  • The TPS43060RTER is rated for operation from -40°C to 125°C, but the maximum ambient temperature range depends on the specific application and the device's power dissipation. In general, the device can operate up to 85°C ambient temperature with proper heat sinking and airflow.

  • The TPS43060RTER has a built-in overcurrent protection feature that can be enabled by connecting a resistor from the OC pin to GND. The resistor value determines the overcurrent threshold. A good starting point is to use a 10 kΩ resistor, which sets the overcurrent threshold to around 2.5 A.

  • Yes, the TPS43060RTER can be used in a synchronous buck configuration, which can improve efficiency and reduce power losses. However, this requires additional external components, such as a synchronous rectifier FET and a Schottky diode, and careful PCB layout to minimize parasitic inductance and capacitance.