Part Details for TDA7297D13TR by STMicroelectronics
Results Overview of TDA7297D13TR by STMicroelectronics
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Price & Stock for TDA7297D13TR
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
497-8868-1-ND
|
DigiKey | IC AMP AB STEREO 10W POWERSO-20 Min Qty: 1 Lead time: 12 Weeks Container: Cut Tape (CT), Digi-Reel®, Tape & Reel (TR) |
600 In Stock |
|
$2.6727 / $4.8500 | Buy Now |
|
|
Vyrian | General Purpose ICs | 570 |
|
RFQ |
Part Details for TDA7297D13TR
TDA7297D13TR CAD Models
TDA7297D13TR Part Data Attributes
|
|
TDA7297D13TR
STMicroelectronics
Buy Now
Datasheet
|
Compare Parts:
TDA7297D13TR
STMicroelectronics
10W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO20, POWER, SOP-20
Select a part to compare: |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | STMICROELECTRONICS | |
| Part Package Code | SOIC | |
| Package Description | POWER, SOP-20 | |
| Pin Count | 20 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | STMicroelectronics | |
| Bandwidth-Nom | 20 kHz | |
| Consumer IC Type | AUDIO AMPLIFIER | |
| Gain | 32 dB | |
| Harmonic Distortion | 10% | |
| JESD-30 Code | R-PDSO-G20 | |
| JESD-609 Code | e3 | |
| Length | 15.9 mm | |
| Number of Channels | 2 | |
| Number of Functions | 1 | |
| Number of Terminals | 20 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Power-Nom | 10 W | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | HSOP | |
| Package Equivalence Code | SOP20,.56 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE, HEAT SINK/SLUG | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 3.5 mm | |
| Supply Current-Max | 65 mA | |
| Supply Voltage-Max (Vsup) | 18 V | |
| Supply Voltage-Min (Vsup) | 6.5 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 11 mm |
Alternate Parts for TDA7297D13TR
This table gives cross-reference parts and alternative options found for TDA7297D13TR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of TDA7297D13TR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| TDA7297D | STMicroelectronics | Check for Price | 10W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO20, POWER, SOP-20 | TDA7297D13TR vs TDA7297D |
TDA7297D13TR Frequently Asked Questions (FAQ)
-
The maximum power supply voltage for the TDA7297D13TR is 40V. Exceeding this voltage may damage the device.
-
To prevent oscillation and noise, ensure proper PCB layout, use a decoupling capacitor (e.g., 100nF) between the power supply pins, and add a Zobel network (e.g., 10Ω, 100nF) between the output and ground.
-
A heat sink with a thermal resistance of 10°C/W or lower is recommended. The device can dissipate up to 20W of power, so a heat sink with a sufficient thermal capacity is necessary to prevent overheating.
-
Yes, the TDA7297D13TR can be used in a bridged configuration to increase the output power. However, this requires careful design and layout to ensure proper operation and prevent damage to the device.
-
Use a current limiter or a fuse in series with the power supply to prevent overcurrent. Also, implement thermal protection using a thermistor or a thermal shutdown circuit to prevent overheating.