Part Details for SN74AHC1G04-Q1 by Texas Instruments
Overview of SN74AHC1G04-Q1 by Texas Instruments
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 crosses)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 crosses)
- Part Data Attributes: (Not Available)
- Reference Designs: (Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Part Details for SN74AHC1G04-Q1
SN74AHC1G04-Q1 CAD Models
Resources and Additional Insights for SN74AHC1G04-Q1
Reference Designs related to SN74AHC1G04-Q1
-
PMP40281 LLC 谐振转换器控制卡参考设计
此参考设计是 LLC 转换器的控制卡。它集成了用来控制 LLC 转换器的所有基本功能，包括高电压启动、X 电容放电和功率 FET 驱动器。通过采用先进的突发模式，即使 PFC 开启时，它也能帮助 LLC 转换器实现超低待机功耗。此外，PMP40281 极其灵活，便于用户评估，并且适用于 LLC 电源板的任何额定功率。通过简单连接，即可使用现有功率级轻松设置基准测试。
-
ADAS Sensor Interconnect Reference Design Board for Remote Camera and Radar Modules
The ADAS Sensor Interconnect Board is intended for applications where remote sensors like cameras: LIDAR or radar modules need to be connected to a central processing ECU. The board supports up to 3 coaxial and 1 LVDS twisted pair data inputs as well as 3 FMC cable and 1 board to board connector as data outputs to a processing ECU. Camera or other sensor modules connected through the coax connector (SMB standard) are powered directly via the coaxial cable (power over coax) from the interconnect board. Because of an independent complete power solution for all ICs and power over coax on board: a single car battery or similar wide voltage supply can be directly connected to the power connector on the ADAS Sensor Interconnect Board. An on-board uC and LIN interface allow control and configuration of the Interconnect board as well as plug-and-play operation.
-
Power Solution for Automotive Audio Amplifiers
This reference design supports the supply for an audio amplifier: such as the TAS5414C-Q1 using the various DC/DC power switchers: LDOs: logic: clocks: and op amps. This reference design is also applicable in start/stop systems.Modifying this reference design can also create a power supply for a radio head unit.
-
PMP7916 汽车类电压质量模块的电源解决方案
The PMP7916 is a boost converter that can be used by a voltage quality module in a start-stop car to condition the battery voltage seen by electronic loads. For such a car to utilize existing electronic assemblies, input voltage to the assemblies is not allowed to dip to 6V during warm cranking o