Part Details for SI4827-A10-CS by Silicon Laboratories Inc
Results Overview of SI4827-A10-CS by Silicon Laboratories Inc
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Consumer Electronics
Education and Research
Industrial Automation
Audio and Video Systems
Electronic Manufacturing
Part Details for SI4827-A10-CS
SI4827-A10-CS CAD Models
SI4827-A10-CS Part Data Attributes
|
|
SI4827-A10-CS
Silicon Laboratories Inc
Buy Now
Datasheet
|
Compare Parts:
SI4827-A10-CS
Silicon Laboratories Inc
Audio Single Chip Receiver,
Select a part to compare: |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | SILICON LABORATORIES INC | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.39.00.01 | |
| Consumer IC Type | AUDIO SINGLE CHIP RECEIVER | |
| JESD-609 Code | e3 | |
| Moisture Sensitivity Level | 3 | |
| Package Code | TFQFP | |
| Peak Reflow Temperature (Cel) | 260 | |
| Terminal Finish | MATTE TIN | |
| Time@Peak Reflow Temperature-Max (s) | 40 |
SI4827-A10-CS Frequently Asked Questions (FAQ)
-
The recommended PCB layout for optimal performance of the SI4827-A10-CS involves keeping the RF traces as short as possible, using a solid ground plane, and placing the device near the antenna. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the RF signal, a layer for the ground plane, and two layers for the digital signals.
-
To configure the SI4827-A10-CS for optimal sensitivity and selectivity, you need to adjust the gain settings, filter bandwidth, and AGC (Automatic Gain Control) settings. The optimal settings will depend on the specific application and frequency band of operation. Refer to the device's programming guide and application notes for more information.
-
The maximum power handling capability of the SI4827-A10-CS is typically limited by the device's internal LNA (Low Noise Amplifier) and mixer stages. According to the datasheet, the device can handle up to +10 dBm of input power, but this may vary depending on the specific application and frequency band of operation.
-
To implement antenna diversity with the SI4827-A10-CS, you need to connect multiple antennas to the device's RF input pins and use the device's built-in antenna diversity feature. This feature allows the device to automatically switch between antennas based on signal strength and quality. Refer to the device's programming guide and application notes for more information.
-
The latency of the SI4827-A10-CS refers to the time it takes for the device to process and output the received signal. According to the datasheet, the device's latency is typically around 10-20 ms, depending on the specific mode of operation and frequency band. This latency may affect system performance in real-time applications, such as audio or video streaming.