Datasheets
SI4734-D60-GU by:
Silicon Laboratories Inc
Silicon Laboratories Inc
Skyworks Solutions Inc
Not Found

Audio Single Chip Receiver, AM/FM, CMOS, PDSO24, ROHS COMPLIANT, MO-137AE, SSOP-24

Part Details for SI4734-D60-GU by Silicon Laboratories Inc

Results Overview of SI4734-D60-GU by Silicon Laboratories Inc

Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.

Applications Consumer Electronics

Part Details for SI4734-D60-GU

SI4734-D60-GU CAD Models

There are no models available for this part yet.

Sign in to request this CAD model.

Register or Sign In

SI4734-D60-GU Part Data Attributes

SI4734-D60-GU Silicon Laboratories Inc
Buy Now Datasheet
Compare Parts:
SI4734-D60-GU Silicon Laboratories Inc Audio Single Chip Receiver, AM/FM, CMOS, PDSO24, ROHS COMPLIANT, MO-137AE, SSOP-24
Select a part to compare:
Rohs Code Yes
Part Life Cycle Code Transferred
Ihs Manufacturer SILICON LABORATORIES INC
Part Package Code SSOP
Package Description ROHS COMPLIANT, MO-137AE, SSOP-24
Pin Count 24
Reach Compliance Code compliant
HTS Code 8542.39.00.01
Consumer IC Type AUDIO SINGLE CHIP RECEIVER
Demodulation Type AM/FM
Harmonic Distortion 0.1%
JESD-30 Code R-PDSO-G24
JESD-609 Code e3
Length 8.65 mm
Moisture Sensitivity Level 3
Number of Functions 1
Number of Terminals 24
Operating Temperature-Max 85 °C
Operating Temperature-Min -20 °C
Output Voltage-Nom (AM) 60 mV
Output Voltage-Nom (FM) 80 mV
Package Body Material PLASTIC/EPOXY
Package Code SSOP
Package Equivalence Code SSOP24,.24
Package Shape RECTANGULAR
Package Style SMALL OUTLINE, SHRINK PITCH
Peak Reflow Temperature (Cel) 260
Qualification Status Not Qualified
Seated Height-Max 2 mm
Signal to Noise Ratio-Nom (FM) 58 dB
Supply Voltage-Max (Vsup) 5.5 V
Supply Voltage-Min (Vsup) 2.7 V
Surface Mount YES
Technology CMOS
Temperature Grade OTHER
Terminal Finish MATTE TIN
Terminal Form GULL WING
Terminal Pitch 0.635 mm
Terminal Position DUAL
Time@Peak Reflow Temperature-Max (s) 40
Width 3.9 mm

Alternate Parts for SI4734-D60-GU

This table gives cross-reference parts and alternative options found for SI4734-D60-GU. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of SI4734-D60-GU, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

Part Number Manufacturer Composite Price Description Compare
SI4734-D60-GUR Skyworks Solutions Inc Check for Price Audio Single Chip Receiver, AM/FM, CMOS, PDSO24, SI4734-D60-GU vs SI4734-D60-GUR
SI4734-D60-GU Skyworks Solutions Inc Check for Price Audio Single Chip Receiver, AM/FM, CMOS, PDSO24, SI4734-D60-GU vs SI4734-D60-GU
SI4734-C40-GU Silicon Laboratories Inc Check for Price Audio Single Chip Receiver, PDSO24, ROHS COMPLIANT, MO-137AE, SSOP-24 SI4734-D60-GU vs SI4734-C40-GU
SI4734-C40-GUR Silicon Laboratories Inc Check for Price Audio Single Chip Receiver, PDSO24, ROHS COMPLIANT, MO-137AE, SSOP-24 SI4734-D60-GU vs SI4734-C40-GUR
SI4734-D60-GUR Silicon Laboratories Inc Check for Price Audio Single Chip Receiver, AM/FM, CMOS, PDSO24, ROHS COMPLIANT, MO-137AE, SSOP-24 SI4734-D60-GU vs SI4734-D60-GUR

SI4734-D60-GU Related Parts

SI4734-D60-GU Frequently Asked Questions (FAQ)

  • The recommended power-up sequence is to apply VDD first, followed by VDDIO, and then the clock signal. This ensures proper initialization of the device.

  • To configure the SI4734-D60-GU for FM radio reception, set the MODE pin to '0' and the BAND pin to '0'. Then, use the I2C interface to set the frequency and other parameters using the appropriate registers.

  • The maximum allowable voltage on the analog input pins is VDD + 0.3V. Exceeding this voltage may damage the device.

  • To implement a mute function, use the MUTE pin to control the audio output. When the MUTE pin is high, the audio output is muted. You can also use the I2C interface to set the mute function using the appropriate registers.

  • The recommended layout and routing for the SI4734-D60-GU involves keeping the analog and digital signals separate, using a solid ground plane, and minimizing the length of the analog signal traces. It's also recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.