Part Details for PT6302C by Texas Instruments
Results Overview of PT6302C by Texas Instruments
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Energy and Power Systems
Renewable Energy
Automotive
PT6302C Information
PT6302C by Texas Instruments is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for PT6302C
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Quest Components | REGULATOR 5.0V 3A ADJ ON/OFF SMD | 2 |
|
$80.0000 | Buy Now |
Part Details for PT6302C
PT6302C CAD Models
PT6302C Part Data Attributes
|
|
PT6302C
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
PT6302C
Texas Instruments
3A SWITCHING REGULATOR, 600kHz SWITCHING FREQ-MAX, SMA12, SIP-12
Select a part to compare: |
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | TEXAS INSTRUMENTS INC | |
| Part Package Code | MODULE | |
| Package Description | , SMSIP12H,.7 | |
| Pin Count | 12 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Additional Feature | INPUT VOLTAGE CAN BE UPTO 38V WHEN THE INHIBIT FUNCTION IS NOT USED | |
| Analog IC - Other Type | SWITCHING REGULATOR | |
| Control Mode | VOLTAGE-MODE | |
| Input Voltage-Max | 30 V | |
| Input Voltage-Min | 9 V | |
| Input Voltage-Nom | 10 V | |
| JESD-30 Code | R-XSMA-G12 | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 12 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current-Max | 3 A | |
| Output Voltage-Nom | 5 V | |
| Package Body Material | UNSPECIFIED | |
| Package Code | SMA | |
| Package Equivalence Code | SMSIP12H,.7 | |
| Package Shape | RECTANGULAR | |
| Package Style | MICROELECTRONIC ASSEMBLY | |
| Qualification Status | Not Qualified | |
| Surface Mount | YES | |
| Switcher Configuration | BUCK | |
| Switching Frequency-Max | 600 kHz | |
| Technology | HYBRID | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | SINGLE |
Alternate Parts for PT6302C
This table gives cross-reference parts and alternative options found for PT6302C. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of PT6302C, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| PT6302CT | Texas Instruments | Check for Price | 3A SWITCHING REGULATOR, 600kHz SWITCHING FREQ-MAX, SMA12, ROHS COMPLIANT, HORIZONTAL SURFACE MOUNT PACKAGE-12 | PT6302C vs PT6302CT |
PT6302C Frequently Asked Questions (FAQ)
-
It is recommended to place the PT6302C close to the power source, use a solid ground plane, and keep the input and output traces separate to minimize EMI and noise. Additionally, use a ferrite bead or a common-mode choke to filter out high-frequency noise.
-
Monitor the device's junction temperature (TJ) and ensure it stays below the maximum rating of 150°C. Also, ensure the device is properly heatsinked, and the thermal resistance (RθJA) is within the recommended range.
-
A low-ESR ceramic capacitor (X5R or X7R) with a value between 4.7 μF to 10 μF is recommended for the input capacitor. This helps to filter out input noise and ensure stable operation.
-
Use a low-ESR output capacitor (e.g., ceramic or polymer) with a value between 10 μF to 22 μF. Add a series resistor (Rs) and a capacitor (Cf) to form a pi-filter (LC filter) to further reduce ripple and noise.
-
Apply the input voltage (VIN) first, followed by the enable signal (EN). This ensures the internal voltage regulators are properly initialized before the device starts operating.