Part Details for OPA569 by Texas Instruments

This Verified Design circuit is a bidirectional current source that can be used to drive floating loads: specifically thermo-electric coolers (TECs) from a single-ended source. The circuit makes use of an internal output current monitor circuit (IMON): which is a special feature of the OPA569 power amplifier. The V-I transfer function is accomplished by using the IMON current as the feedback for the first amplifier. This enables the user to create an input signal that cancels the IMON current to achieve a well regulated output current. The second amplifier inverts the output of the first amp to achieve the bridge tied load (BTL) operation: doubling the voltage swing and slew rate across the load: allowing for bidirectional operation and good voltage swing on the single-ended power supply. The excellent output swing-to-rail of the OPA569 allows for 4.5 V of usable output voltage at 2 A output current with a 5 V single-ended power supply.See more TI Precision Designs

This near-infrared (NIR) spectrometer reference design utilizes Texas Instruments' DLP technology in conjunction with a single-element InGaAs detector to deliver high performance measurements in a portable form factor that is more affordable than expensive InGaAs array detector or fragile rotating grating architectures.  NIR spectrometers are commonly used to analyze organic-based liquids and solids for applications including food: agriculture: pharmaceuticals: petrochemicals: and plastics to name a few.  Combined with a powerful Sitara™ embedded Processor and analog signal chain components: developers are now able to bring the power of high-end laboratory spectrometers to the field and manufacturing line.

TIDA-01002 参考设计提供适用于 ADAS 和信息娱乐系统的未经压缩的 1 百万像素 HDR YUV422 视频。它运用 TI 的 FPD-Link III 串行器/解串器技术和 ON Semiconductor® AS0140AT CMOS 成像仪，只需通过一条同轴电缆即可传送视频数据、双向控制信号和电力。该设计可用于环视系统、后视摄像头或用于替代模拟或以太网摄像头。

The CC2540 USB Dongle is a complete example of how to use the USB enabled Bluetooth Low Energy (BLE) Wireless MCU. The reference design can be used to enable Bluetooth Smart and Internet of Things applications on any system that contains a USB host.