Part Details for MC74HC541ADW by onsemi
Results Overview of MC74HC541ADW by onsemi
- Distributor Offerings: (5 listings)
- Number of FFF Equivalents: (9 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
MC74HC541ADW Information
MC74HC541ADW by onsemi is a Bus Driver/Transceiver.
Bus Driver/Transceivers are under the broader part category of Logic Components.
Digital logic governs the behavior of signals in electronic circuits, enabling complex decisions based on simple binary inputs (yes/no). Logic components perform operations from these signals. Read more about Logic Components on our Logic part category page.
Price & Stock for MC74HC541ADW
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Bristol Electronics | 452 |
|
RFQ | ||
|
|
Quest Components | IC,BUFFER/DRIVER,SINGLE,8-BIT,HC-CMOS,SOP,20PIN,PLASTIC | 79 |
|
$0.7450 / $1.4900 | Buy Now |
|
|
ComSIT USA | Electronic Component RoHS: Not Compliant |
|
|
RFQ | |
|
|
Component Electronics, Inc | IN STOCK SHIP TODAY | 20 |
|
$0.8000 / $1.2300 | Buy Now |
|
|
Win Source Electronics | Octal 3-State Non-Inverting Buffer/Line Driver/Line Receiver | 3200 |
|
$0.3185 / $0.4777 | Buy Now |
Part Details for MC74HC541ADW
MC74HC541ADW CAD Models
MC74HC541ADW Part Data Attributes
|
|
MC74HC541ADW
onsemi
Buy Now
Datasheet
|
Compare Parts:
MC74HC541ADW
onsemi
HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, SOIC-20
Select a part to compare: |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ONSEMI | |
| Part Package Code | SOIC | |
| Package Description | SOIC-20 | |
| Pin Count | 20 | |
| Reach Compliance Code | not_compliant | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | onsemi | |
| Control Type | ENABLE LOW | |
| Family | HC/UH | |
| JESD-30 Code | R-PDSO-G20 | |
| JESD-609 Code | e0 | |
| Length | 12.8 mm | |
| Load Capacitance (CL) | 50 pF | |
| Logic IC Type | BUS DRIVER | |
| Max I(ol) | 0.006 A | |
| Moisture Sensitivity Level | 3 | |
| Number of Bits | 8 | |
| Number of Functions | 1 | |
| Number of Ports | 2 | |
| Number of Terminals | 20 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -55 °C | |
| Output Characteristics | 3-STATE | |
| Output Polarity | TRUE | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP20,.4 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Peak Reflow Temperature (Cel) | 235 | |
| Prop. Delay@Nom-Sup | 28 ns | |
| Propagation Delay (tpd) | 165 ns | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 2.65 mm | |
| Supply Voltage-Max (Vsup) | 6 V | |
| Supply Voltage-Min (Vsup) | 2 V | |
| Supply Voltage-Nom (Vsup) | 3 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | MILITARY | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Width | 7.5 mm |
Alternate Parts for MC74HC541ADW
This table gives cross-reference parts and alternative options found for MC74HC541ADW. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of MC74HC541ADW, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| M74HC541M1 | STMicroelectronics | Check for Price | HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, MICRO, PLASTIC, DIP-20 | MC74HC541ADW vs M74HC541M1 |
| HD74HC541RP | Hitachi Ltd | Check for Price | Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20, FP-20DB | MC74HC541ADW vs HD74HC541RP |
| HD74HC541RPV-E | Renesas Electronics Corporation | Check for Price | HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, FP-20DB | MC74HC541ADW vs HD74HC541RPV-E |
| SN74HC541DWE4 | Texas Instruments | Check for Price | 8-ch, 2-V to 6-V buffers with 3-state outputs 20-SOIC -40 to 85 | MC74HC541ADW vs SN74HC541DWE4 |
| SN74HC541DW | Texas Instruments | $0.3087 | 8-ch, 2-V to 6-V buffers with 3-state outputs 20-SOIC -40 to 85 | MC74HC541ADW vs SN74HC541DW |
| HD74HC541RP-EL | Hitachi Ltd | Check for Price | Bus Driver, HC/UH Series, 1-Func, 8-Bit, True Output, CMOS, PDSO20, FP-20DB | MC74HC541ADW vs HD74HC541RP-EL |
| CD74HC541M96 | Rochester Electronics LLC | Check for Price | HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20 | MC74HC541ADW vs CD74HC541M96 |
| CD74HC541M96G4 | Texas Instruments | Check for Price | 8-ch, 2-V to 6-V buffers with 3-state outputs 20-SOIC -55 to 125 | MC74HC541ADW vs CD74HC541M96G4 |
| TC74HC541AFW(ELP) | Toshiba America Electronic Components | Check for Price | IC HC/UH SERIES, 8-BIT DRIVER, TRUE OUTPUT, PDSO20, 0.300 INCH, PLASTIC, SOIC-20, Bus Driver/Transceiver | MC74HC541ADW vs TC74HC541AFW(ELP) |
MC74HC541ADW Frequently Asked Questions (FAQ)
-
The recommended operating voltage range for the MC74HC541ADW is 2V to 6V, with a typical voltage of 5V.
-
The output enable (OE) pin is active-low, meaning that the outputs are enabled when OE is low and disabled when OE is high. You should connect OE to a logic low signal to enable the outputs and a logic high signal to disable them.
-
The maximum frequency of operation for the MC74HC541ADW is typically 25 MHz, but this can vary depending on the operating voltage and load conditions.
-
To ensure proper operation, you should provide a stable power supply voltage to the VCC pin, and decouple the power supply lines with capacitors (e.g., 0.1 μF and 10 μF) to reduce noise and voltage droop.
-
The MC74HC541ADW can sink or source up to 25 mA of current per output pin, but this should be limited to 100 mA total current per package to avoid overheating.