Part Details for LTC1562AIG#PBF by Linear Technology
Results Overview of LTC1562AIG#PBF by Linear Technology
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
LTC1562AIG#PBF Information
LTC1562AIG#PBF by Linear Technology is an Active Filter.
Active Filters are under the broader part category of Filters.
A filter is an electronic circuit that selectively allows certain frequencies to pass while attenuating others. They are used to extract desired signals and remove noise. Read more about Filters on our Filters part category page.
Price & Stock for LTC1562AIG#PBF
Part # | Distributor | Description | Stock | Price | Buy | |
---|---|---|---|---|---|---|
|
Rochester Electronics | LTC1562 - Very Low Noise, Low Distortion Active RC Quad Universal Filter RoHS: Compliant Status: Active Min Qty: 1 | 8 |
|
$19.3900 / $24.2400 | Buy Now |
|
Win Source Electronics | IC FILTER UNIV RC QUAD LN 20SSOP | 1980 |
|
$51.4590 / $77.1885 | Buy Now |
Part Details for LTC1562AIG#PBF
LTC1562AIG#PBF CAD Models
LTC1562AIG#PBF Part Data Attributes
|
LTC1562AIG#PBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LTC1562AIG#PBF
Linear Technology
LTC1562 - Very Low Noise, Low Distortion Active RC Quad Universal Filter; Package: SSOP; Pins: 20; Temperature Range: -40°C to 85°C
Select a part to compare: |
Rohs Code | Yes | |
Part Life Cycle Code | Transferred | |
Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
Part Package Code | SSOP | |
Package Description | PLASTIC, SSOP-20 | |
Pin Count | 20 | |
Manufacturer Package Code | G | |
Reach Compliance Code | compliant | |
ECCN Code | EAR99 | |
HTS Code | 8542.39.00.01 | |
Active Filter Type | CONTINUOUS TIME FILTER | |
Center or Cutoff Freq Rng-Max | 150 kHz | |
Center or Cutoff Freq Rng-Min | 10 kHz | |
JESD-30 Code | R-PDSO-G20 | |
JESD-609 Code | e3 | |
Length | 7.2 mm | |
Moisture Sensitivity Level | 1 | |
Neg Supply Voltage-Max (Vsup) | -5 V | |
Neg Supply Voltage-Min (Vsup) | -2.5 V | |
Neg Supply Voltage-Nom (Vsup) | -5 V | |
Number of Functions | 4 | |
Number of Terminals | 20 | |
Operating Temperature-Max | 85 °C | |
Operating Temperature-Min | -40 °C | |
Order | 2ND | |
Package Body Material | PLASTIC/EPOXY | |
Package Code | SSOP | |
Package Equivalence Code | SSOP20,.25 | |
Package Shape | RECTANGULAR | |
Package Style | SMALL OUTLINE, SHRINK PITCH | |
Peak Reflow Temperature (Cel) | 260 | |
Poles and Zeros | 2 AND 0 | |
Qualification Status | Not Qualified | |
Response | UNIVERSAL | |
Seated Height-Max | 2 mm | |
Supply Current-Max (Isup) | 25.5 mA | |
Supply Voltage-Max (Vsup) | 5 V | |
Supply Voltage-Min (Vsup) | 2.5 V | |
Supply Voltage-Nom (Vsup) | 5 V | |
Surface Mount | YES | |
Technology | CMOS | |
Temperature Grade | INDUSTRIAL | |
Terminal Finish | Matte Tin (Sn) | |
Terminal Form | GULL WING | |
Terminal Pitch | 0.65 mm | |
Terminal Position | DUAL | |
Time@Peak Reflow Temperature-Max (s) | 30 | |
Transfer Characteristics | RESISTOR PROGRAMMABLE | |
Width | 5.3 mm |
Alternate Parts for LTC1562AIG#PBF
This table gives cross-reference parts and alternative options found for LTC1562AIG#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1562AIG#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
Part Number | Manufacturer | Composite Price | Description | Compare |
---|---|---|---|---|
LTC1562AIG | Analog Devices Inc | Check for Price | Continuous Time Filter, 4 Func, Resistor Programmable, Universal, CMOS, PDSO20 | LTC1562AIG#PBF vs LTC1562AIG |
LTC1562AIG | Linear Technology | Check for Price | LTC1562 - Very Low Noise, Low Distortion Active RC Quad Universal Filter; Package: SSOP; Pins: 20; Temperature Range: -40°C to 85°C | LTC1562AIG#PBF vs LTC1562AIG |
LTC1562ACG | Analog Devices Inc | Check for Price | Continuous Time Filter, 4 Func, Resistor Programmable, Universal, CMOS, PDSO20 | LTC1562AIG#PBF vs LTC1562ACG |
LTC1562ACG#PBF | Linear Technology | Check for Price | LTC1562 - Very Low Noise, Low Distortion Active RC Quad Universal Filter; Package: SSOP; Pins: 20; Temperature Range: 0°C to 70°C | LTC1562AIG#PBF vs LTC1562ACG#PBF |
LTC1562AIG#PBF Frequently Asked Questions (FAQ)
-
The recommended PCB layout for the LTC1562AIG involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the IC and the capacitors. A 4-layer board with a dedicated ground plane is recommended.
-
To optimize the performance of the LTC1562AIG in a noisy environment, use a low-pass filter on the input signal, add a ferrite bead or a common-mode choke to the power supply lines, and use a shielded enclosure to reduce electromagnetic interference (EMI).
-
The maximum operating temperature range for the LTC1562AIG is -40°C to 85°C. However, the device can be operated at temperatures up to 125°C for short periods of time during soldering or reflow.
-
Yes, the LTC1562AIG can be used with a single-supply voltage. However, the input signal must be biased around the mid-supply voltage, and the output voltage swing will be limited to the supply voltage minus the output voltage swing of the op-amp.
-
Common issues with the LTC1562AIG include oscillation, noise, and distortion. To troubleshoot these issues, check the PCB layout, ensure proper power supply decoupling, and verify that the input signal is within the specified range. Also, check for component damage or incorrect component values.