Part Details for LTC1290BCN#PBF by Linear Technology
Results Overview of LTC1290BCN#PBF by Linear Technology
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (4 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
LTC1290BCN#PBF Information
LTC1290BCN#PBF by Linear Technology is an Analog to Digital Converter.
Analog to Digital Converters are under the broader part category of Converters.
A converter is an electrical circuit that transforms electric energy into a different form that will support a elecrical load needed by a device. Read more about Converters on our Converters part category page.
Price & Stock for LTC1290BCN#PBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
2156-LTC1290BCN#PBF-600060-ND
|
DigiKey | LTC1290 - 12-BIT SERIAL I/O ADC Min Qty: 8 Lead time: 1 Weeks Container: Bulk MARKETPLACE PRODUCT |
1851 In Stock |
|
$41.2700 | Buy Now |
|
|
Rochester Electronics | LTC1290 - 12-Bit Serial I/O ADC w/8 CH MUX RoHS: Compliant Status: Active Min Qty: 1 | 1851 |
|
$31.7400 / $39.6800 | Buy Now |
Part Details for LTC1290BCN#PBF
LTC1290BCN#PBF CAD Models
LTC1290BCN#PBF Part Data Attributes
|
|
LTC1290BCN#PBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LTC1290BCN#PBF
Linear Technology
LTC1290 - Single Chip 12-Bit Data Acquisition System; Package: PDIP; Pins: 20; Temperature Range: 0°C to 70°C
Select a part to compare: |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | DIP | |
| Package Description | 0.300 INCH, LEAD FREE, PLASTIC, DIP-20 | |
| Pin Count | 20 | |
| Manufacturer Package Code | N | |
| Reach Compliance Code | compliant | |
| HTS Code | 8542.39.00.01 | |
| Analog Input Voltage-Max | 5.05 V | |
| Analog Input Voltage-Min | -5.05 V | |
| Conversion Time-Max | 13 µs | |
| Converter Type | ADC, SUCCESSIVE APPROXIMATION | |
| JESD-30 Code | R-PDIP-T20 | |
| JESD-609 Code | e3 | |
| Linearity Error-Max (EL) | 0.0122% | |
| Moisture Sensitivity Level | 1 | |
| Negative Supply Voltage-Nom | -5 V | |
| Number of Analog In Channels | 8 | |
| Number of Bits | 12 | |
| Number of Functions | 1 | |
| Number of Terminals | 20 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Output Bit Code | 2'S COMPLEMENT BINARY | |
| Output Format | SERIAL | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP20,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Sample Rate | 0.05 MHz | |
| Sample and Hold / Track and Hold | SAMPLE | |
| Seated Height-Max | 3.937 mm | |
| Supply Voltage-Nom | 5 V | |
| Surface Mount | NO | |
| Technology | CMOS | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 7.62 mm |
Alternate Parts for LTC1290BCN#PBF
This table gives cross-reference parts and alternative options found for LTC1290BCN#PBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LTC1290BCN#PBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LTC1290BIN#TR | Linear Technology | Check for Price | IC 8-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDIP20, 0.300 INCH, PLASTIC, DIP-20, Analog to Digital Converter | LTC1290BCN#PBF vs LTC1290BIN#TR |
| LTC1290BCN#TR | Linear Technology | Check for Price | IC 8-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDIP20, 0.300 INCH, PLASTIC, DIP-20, Analog to Digital Converter | LTC1290BCN#PBF vs LTC1290BCN#TR |
| LTC1290BMJ#PBF | Linear Technology | Check for Price | IC 8-CH 12-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, CDIP20, 0.300 INCH, LEAD FREE, HERMETIC SEALED, CERAMIC, DIP-20, Analog to Digital Converter | LTC1290BCN#PBF vs LTC1290BMJ#PBF |
| LTC1290BCN#TRPBF | Analog Devices Inc | Check for Price | ADC, Successive Approximation, 12-Bit, 1 Func, 8 Channel, Serial Access, CMOS, PDIP20 | LTC1290BCN#PBF vs LTC1290BCN#TRPBF |
LTC1290BCN#PBF Frequently Asked Questions (FAQ)
-
The maximum clock frequency that can be used with the LTC1290 is 1.5MHz. However, it's recommended to use a clock frequency of 1MHz or less to ensure reliable operation.
-
To ensure accurate conversions with the LTC1290, make sure to follow proper layout and grounding techniques, use a low-noise power supply, and minimize digital noise on the analog input pins. Additionally, use the recommended capacitor values for the internal oscillator and reference voltage.
-
Yes, the LTC1290 can be used with a single-ended analog input. However, the input signal should be referenced to the analog ground (AGND) pin, and the analog input range should be limited to 0V to VREF (2.5V or 5V, depending on the reference voltage used).
-
The LTC1290 can be interfaced with a microcontroller using a 3-wire serial interface (SCK, DIN, and DOUT). The microcontroller should provide a clock signal to the SCK pin, and data is transferred serially through the DIN and DOUT pins. Make sure to follow the timing diagrams and protocol specified in the datasheet.
-
The LTC1290 has a power-on reset (POR) circuit that resets the device to a known state when the power supply voltage (VCC) rises above 1.5V. The POR circuit ensures that the device starts up in a consistent state, regardless of the power-up sequence.