Part Details for LT1112S8#TRPBF by Linear Technology
Results Overview of LT1112S8#TRPBF by Linear Technology
- Distributor Offerings: (3 listings)
- Number of FFF Equivalents: (5 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
LT1112S8#TRPBF Information
LT1112S8#TRPBF by Linear Technology is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LT1112S8#TRPBF
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Velocity Electronics | Our Stock | 22 |
|
RFQ | |
|
|
Vyrian | Amplifiers | 6123 |
|
RFQ | |
|
|
Win Source Electronics | IC OPAMP GP 750KHZ 8SO | 4770 |
|
$7.5000 / $9.6875 | Buy Now |
Part Details for LT1112S8#TRPBF
LT1112S8#TRPBF CAD Models
LT1112S8#TRPBF Part Data Attributes
|
|
LT1112S8#TRPBF
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LT1112S8#TRPBF
Linear Technology
LT1112 - Dual Low Power Precision, Picoamp Input Op Amps; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C
Select a part to compare: |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | SOIC | |
| Package Description | 0.150 INCH, LEAD FREE, PLASTIC, SOP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | S8 | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.00035 µA | |
| Bias Current-Max (IIB) @25C | 0.00023 µA | |
| Common-mode Reject Ratio-Nom | 133 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 150 µV | |
| JESD-30 Code | R-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 4.9 mm | |
| Low-Bias | YES | |
| Low-Offset | YES | |
| Micropower | YES | |
| Moisture Sensitivity Level | 1 | |
| Neg Supply Voltage Limit-Max | -20 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 2 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | SOP | |
| Package Equivalence Code | SOP8,.25 | |
| Package Shape | RECTANGULAR | |
| Package Style | SMALL OUTLINE | |
| Packing Method | TR | |
| Peak Reflow Temperature (Cel) | 260 | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.752 mm | |
| Slew Rate-Min | 0.13 V/us | |
| Slew Rate-Nom | 0.27 V/us | |
| Supply Current-Max | 1.02 mA | |
| Supply Voltage Limit-Max | 20 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | YES | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | Matte Tin (Sn) | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 1.27 mm | |
| Terminal Position | DUAL | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Unity Gain BW-Nom | 750 | |
| Voltage Gain-Min | 400000 | |
| Width | 3.9 mm |
Alternate Parts for LT1112S8#TRPBF
This table gives cross-reference parts and alternative options found for LT1112S8#TRPBF. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1112S8#TRPBF, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT1112IS8#TRPBF | Analog Devices Inc | $5.2897 | Dual Low Power Precision, Picoamp Input Op Amps | LT1112S8#TRPBF vs LT1112IS8#TRPBF |
| LT1112S8#PBF | Analog Devices Inc | $6.3756 | Dual Low Power Precision, Picoamp Input Op Amps | LT1112S8#TRPBF vs LT1112S8#PBF |
| LT1112IS8#TRPBF | Linear Technology | Check for Price | LT1112 - Dual Low Power Precision, Picoamp Input Op Amps; Package: SO; Pins: 8; Temperature Range: -40°C to 85°C | LT1112S8#TRPBF vs LT1112IS8#TRPBF |
| LT1112S8#TRPBF | Analog Devices Inc | $4.8577 | Dual Low Power Precision, Picoamp Input Op Amps | LT1112S8#TRPBF vs LT1112S8#TRPBF |
| LT1112IS8 | Analog Devices Inc | Check for Price | Operational Amplifier, 2 Func, 160uV Offset-Max, BIPolar, PDSO8 | LT1112S8#TRPBF vs LT1112IS8 |
LT1112S8#TRPBF Frequently Asked Questions (FAQ)
-
The maximum input voltage that can be applied to the LT1112S8 is 15V, but it's recommended to keep it below 12V for optimal performance and reliability.
-
To ensure stability, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, keep the output voltage within the recommended range of 1.2V to 12V.
-
The maximum output current that the LT1112S8 can deliver is 1.5A, but it's recommended to keep it below 1.2A for optimal performance and reliability.
-
To reduce noise and ripple, use a low-ESR output capacitor, and consider adding a noise-reducing capacitor (e.g., 10nF) between the Vout and GND pins. Also, keep the input and output capacitors close to the IC to minimize noise.
-
The thermal shutdown temperature of the LT1112S8 is 150°C. If the junction temperature exceeds this value, the IC will shut down to prevent damage.