Part Details for LT1001ACN8 by Linear Technology
Results Overview of LT1001ACN8 by Linear Technology
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (8 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
LT1001ACN8 Information
LT1001ACN8 by Linear Technology is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for LT1001ACN8
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
ComSIT USA | PRECISION OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 60uV Offset-Max, BIPolar, PDIP8 ECCN: EAR99 RoHS: Not Compliant |
|
|
RFQ |
Part Details for LT1001ACN8
LT1001ACN8 CAD Models
LT1001ACN8 Part Data Attributes
|
|
LT1001ACN8
Linear Technology
Buy Now
Datasheet
|
Compare Parts:
LT1001ACN8
Linear Technology
LT1001 - Precision Operational Amplifier; Package: PDIP; Pins: 8; Temperature Range: 0°C to 70°C
Select a part to compare: |
| Rohs Code | No | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | LINEAR TECHNOLOGY CORP | |
| Part Package Code | DIP | |
| Package Description | 0.300 INCH, PLASTIC, DIP-8 | |
| Pin Count | 8 | |
| Manufacturer Package Code | N | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.0035 µA | |
| Bias Current-Max (IIB) @25C | 0.002 µA | |
| Common-mode Reject Ratio-Nom | 124 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 60 µV | |
| JESD-30 Code | R-PDIP-T8 | |
| JESD-609 Code | e0 | |
| Low-Offset | YES | |
| Neg Supply Voltage Limit-Max | -22 V | |
| Neg Supply Voltage-Nom (Vsup) | -15 V | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 70 °C | |
| Operating Temperature-Min | ||
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | DIP | |
| Package Equivalence Code | DIP8,.3 | |
| Package Shape | RECTANGULAR | |
| Package Style | IN-LINE | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 3.937 mm | |
| Slew Rate-Min | 0.1 V/us | |
| Slew Rate-Nom | 0.25 V/us | |
| Supply Current-Max | 2.8 mA | |
| Supply Voltage Limit-Max | 22 V | |
| Supply Voltage-Nom (Vsup) | 15 V | |
| Surface Mount | NO | |
| Technology | BIPOLAR | |
| Temperature Grade | COMMERCIAL | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Pitch | 2.54 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 800 | |
| Voltage Gain-Min | 300000 | |
| Width | 7.62 mm |
Alternate Parts for LT1001ACN8
This table gives cross-reference parts and alternative options found for LT1001ACN8. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LT1001ACN8, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LT1001ACJG | Texas Instruments | Check for Price | OP-AMP, 60uV OFFSET-MAX, 0.8MHz BAND WIDTH, CDIP8, 0.300 INCH, HERMETIC SEALED, CERAMIC, DIP-8 | LT1001ACN8 vs LT1001ACJG |
LT1001ACN8 Frequently Asked Questions (FAQ)
-
The LT1001ACN8 is a high-precision op-amp, and its performance can be affected by the layout and placement of the components. It is recommended to keep the input and output traces short and away from noise sources, and to use a ground plane to reduce noise coupling. Additionally, the power supply pins should be decoupled with capacitors to reduce noise and ripple.
-
The LT1001ACN8 is specified to operate from -40°C to 85°C. To ensure the device operates within this range, it is recommended to provide adequate heat sinking and to avoid exposing the device to extreme temperatures. Additionally, the device should be operated within its specified power supply voltage range to prevent overheating.
-
The LT1001ACN8 can drive capacitive loads up to 1000pF without oscillation. However, the maximum capacitive load that the device can drive depends on the specific application and the frequency of operation. It is recommended to consult the datasheet and application notes for more information.
-
To reduce noise and distortion when using the LT1001ACN8, it is recommended to use a low-noise power supply, to decouple the power supply pins with capacitors, and to use a low-pass filter at the output. Additionally, the input and output traces should be kept short and away from noise sources, and the device should be operated within its specified frequency range.
-
The LT1001ACN8 is specified to operate from a single supply voltage of 5V to 36V, or from a dual supply voltage of ±2.5V to ±18V. It is recommended to operate the device within this range to ensure optimal performance and to prevent damage to the device.