Part Details for LFCN-1325 by Mini-Circuits
Results Overview of LFCN-1325 by Mini-Circuits
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (0 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Environmental Monitoring
Industrial Automation
LFCN-1325 Information
LFCN-1325 by Mini-Circuits is a Ceramic Filter.
Ceramic Filters are under the broader part category of Filters.
A filter is an electronic circuit that selectively allows certain frequencies to pass while attenuating others. They are used to extract desired signals and remove noise. Read more about Filters on our Filters part category page.
Available Datasheets
| Part # | Manufacturer | Description | Datasheet |
|---|---|---|---|
| TLV71325PDBVR | Texas Instruments | 150mA Low-Dropout (LDO) Regulator With Foldback Current Limit for Portable Devices 5-SOT-23 -40 to 125 | |
| TPS61325YFFT | Texas Instruments | 1.5A/4.1A Multiple LED Camera Flash Driver with I<sup>2</sup>C Compatible Interface 20-DSBGA -40 to 85 | |
| TLV71325PQDBVRQ1 | Texas Instruments | Automotive Capacitor-Free 150mA Low-Dropout (LDO) Regulator With Foldback Current Limit 5-SOT-23 -40 to 125 |
Price & Stock for LFCN-1325
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
72AJ5689
|
Newark | Signal Conditioning Low Pass Fltr/Surf Mt/Rohs |Mini-Circuits LFCN-1325 RoHS: Not Compliant Min Qty: 20 Package Multiple: 1 Date Code: 0 Container: Bulk | 0 |
|
Buy Now | |
|
|
Quest Components | 5 SECTIONS - 5 SECTIONS, 1560 MHz, CERAMIC LPF | 21 |
|
$3.3750 / $6.7500 | Buy Now |
Part Details for LFCN-1325
LFCN-1325 CAD Models
LFCN-1325 Part Data Attributes
|
|
LFCN-1325
Mini-Circuits
Buy Now
Datasheet
|
Compare Parts:
LFCN-1325
Mini-Circuits
Ceramic LPF, 5 Section(s) Min, 5 Section(s) Max, 1560MHz, CERAMIC, CASE FV1206, 4 PIN
Select a part to compare: |
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Active | |
| Ihs Manufacturer | MINI-CIRCUITS | |
| Package Description | CERAMIC, CASE FV1206, 4 PIN | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| Additional Feature | TAPE AND REEL | |
| Attenuation Frequency (+/- delta f)-Max | 640000 kHz | |
| Attenuation Frequency (+/- delta f)-Min | 540000 kHz | |
| Attenuation@Freq-Max | 30 dB | |
| Attenuation@Freq-Min | 20 dB | |
| Average Input Power | 9 W | |
| Center or Cutoff Frequency (fo/fc) | 1560 MHz | |
| Filter Type | CERAMIC LPF | |
| Height | 0.94 mm | |
| Input/Output Impedance | 50 OHM | |
| Insertion Loss-Max | 3 dB | |
| JESD-609 Code | e0 | |
| Length | 3.2 mm | |
| Mounting Type | SURFACE MOUNT | |
| Number of Sections-Max | 5 | |
| Number of Sections-Min | 5 | |
| Number of Terminals | 4 | |
| Operating Temperature-Max | 100 °C | |
| Operating Temperature-Min | -55 °C | |
| Terminal Finish | TIN LEAD | |
| VSWR | 1.4 | |
| Width | 1.6 mm |
Alternate Parts for LFCN-1325
This table gives cross-reference parts and alternative options found for LFCN-1325. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of LFCN-1325, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| LFCN-1325+ | Mini-Circuits | Check for Price | Ceramic LPF, 5 Section(s) Min, 5 Section(s) Max, 1560MHz, ROHS COMPLIANT, CERAMIC, CASE FV1206, 4 PIN | LFCN-1325 vs LFCN-1325+ |
LFCN-1325 Frequently Asked Questions (FAQ)
-
Mini-Circuits provides a recommended PCB layout and footprint in their application note AN-60-014, which can be found on their website. It's essential to follow this layout to ensure optimal performance and minimize parasitic effects.
-
The LFCN-1325 can generate significant heat during operation. It's crucial to provide adequate heat sinking, such as a thermal pad or heat sink, to keep the junction temperature below 125°C. Ensure good airflow and avoid blocking the airflow around the device.
-
While the datasheet doesn't specify a maximum input power, it's generally recommended to keep the input power below 10 dBm to avoid compression and distortion. Exceeding this power may lead to reduced performance, increased noise, and potentially damage the device.
-
The LFCN-1325 is designed for 50 ohm systems, but it can be used in non-50 ohm systems with some caveats. Impedance matching networks may be required to ensure optimal performance. Consult with a qualified RF engineer or Mini-Circuits' application support team for guidance.
-
The typical current consumption of LFCN-1325 is around 40-50 mA, depending on the operating frequency and input power. However, this value can vary depending on the specific application and operating conditions. Consult the datasheet and application notes for more information.