-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
Part Details for HMC547LP3ETR by Analog Devices Inc
Results Overview of HMC547LP3ETR by Analog Devices Inc
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (2 replacements)
- CAD Models: (Available)
- Number of Functional Equivalents: (2 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
HMC547LP3ETR Information
HMC547LP3ETR by Analog Devices Inc is an RF/Microwave Switch.
RF/Microwave Switches are under the broader part category of RF and Microwave Components.
RF and Microwave Engineering focuses on the design and operation of devices that transmit or receive radio waves. The main distinction between RF and microwave engineering is their wavelength, which influences how energy is transmitted and used in various applications. Read more about RF and Microwave Components on our RF and Microwave part category page.
Part Details for HMC547LP3ETR
HMC547LP3ETR CAD Models
HMC547LP3ETR Part Data Attributes
|
|
HMC547LP3ETR
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
HMC547LP3ETR
Analog Devices Inc
HMC547LC3 / HMC547LP3 GaAs MMIC, High Isolation SPDT Nonreflective Switch SMT, DC to 28.0 GHz
Select a part to compare: |
| Pbfree Code | No | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Pin Count | 16 | |
| Manufacturer Package Code | HCP-16-3 | |
| Reach Compliance Code | unknown | |
| Samacsys Manufacturer | Analog Devices | |
| 1dB Compression Point | 23 dBm | |
| Characteristic Impedance | 50 Ω | |
| Construction | COMPONENT | |
| Input Power-Max (CW) | 30 dBm | |
| Insertion Loss-Max | 2.5 dB | |
| Isolation-Min | 33 dB | |
| Mounting Feature | SURFACE MOUNT | |
| Number of Functions | 1 | |
| Number of Terminals | 16 | |
| On Time-Nom | 0.006 µs | |
| Operating Frequency-Max | 20000 MHz | |
| Operating Frequency-Min | ||
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Equivalence Code | LCC16,.12SQ,20 | |
| RF/Microwave Device Type | SPDT | |
| Surface Mount | YES | |
| VSWR-Max | 1.33 |
Alternate Parts for HMC547LP3ETR
This table gives cross-reference parts and alternative options found for HMC547LP3ETR. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of HMC547LP3ETR, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| HMC547LP3RTR | Analog Devices Inc | Check for Price | IC,RF SWITCH,SINGLE,SPDT,LLCC,16PIN,PLASTIC | HMC547LP3ETR vs HMC547LP3RTR |
| HMC547LP3ERTR | Analog Devices Inc | Check for Price | IC,RF SWITCH,SINGLE,SPDT,LLCC,16PIN,PLASTIC | HMC547LP3ETR vs HMC547LP3ERTR |
HMC547LP3ETR Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the signal traces short and away from the power plane to minimize noise coupling.
-
The HMC547LP3ETR requires a single 3.3V power supply. Ensure the voltage supply is clean and regulated, and decouple the power pins with 10nF and 100nF capacitors.
-
The HMC547LP3ETR can operate up to 6 GHz, but the maximum frequency depends on the specific application and the quality of the PCB layout.
-
Use a low-noise voltage regulator, minimize the length of the input traces, and use a high-quality RF choke to isolate the power supply from the RF signal.
-
Yes, the HMC547LP3ETR can be used in a differential configuration to improve common-mode rejection and reduce noise.