Part Details for EN63A0QI by Intel Enpirion Power Solutions
Results Overview of EN63A0QI by Intel Enpirion Power Solutions
- Distributor Offerings: (1 listing)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (1 option)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
EN63A0QI Information
EN63A0QI by Intel Enpirion Power Solutions is a Switching Regulator or Controller.
Switching Regulator or Controllers are under the broader part category of Power Circuits.
A power circuit delivers electricity in order to operate a load for an electronic device. Power circuits include transformers, generators and switches. Read more about Power Circuits on our Power Circuits part category page.
Price & Stock for EN63A0QI
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Vyrian | Other Function Semiconductors | 1454 |
|
RFQ |
Part Details for EN63A0QI
EN63A0QI CAD Models
EN63A0QI Part Data Attributes
|
|
EN63A0QI
Intel Enpirion Power Solutions
Buy Now
Datasheet
|
Compare Parts:
EN63A0QI
Intel Enpirion Power Solutions
Switching Regulator, Voltage-mode, 12A, 1500kHz Switching Freq-Max, PQCC76
Select a part to compare: |
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Transferred | |
| Ihs Manufacturer | ENPIRION INC | |
| Reach Compliance Code | compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Samacsys Manufacturer | Enpirion | |
| Analog IC - Other Type | SWITCHING REGULATOR | |
| Control Mode | VOLTAGE-MODE | |
| JESD-30 Code | R-PQCC-N76 | |
| Number of Terminals | 76 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Current-Max | 12 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | QCCN | |
| Package Equivalence Code | LCC76,.39X.43,20 | |
| Package Shape | RECTANGULAR | |
| Package Style | CHIP CARRIER | |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED | |
| Qualification Status | Not Qualified | |
| Surface Mount | YES | |
| Switching Frequency-Max | 1500 kHz | |
| Temperature Grade | INDUSTRIAL | |
| Terminal Form | NO LEAD | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | QUAD | |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
Alternate Parts for EN63A0QI
This table gives cross-reference parts and alternative options found for EN63A0QI. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of EN63A0QI, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| EN63A0QI | Altera Corporation | Check for Price | Switching Regulator, Voltage-mode, 12A, 1500kHz Switching Freq-Max, 10 X 11 MM, 3 MM HEIGHT, ROHS COMPLIANT, QFN-77 | EN63A0QI vs EN63A0QI |
EN63A0QI Frequently Asked Questions (FAQ)
-
A 4-layer PCB with a solid ground plane and thermal vias is recommended. Keep the component side of the PCB clear of copper to minimize thermal resistance.
-
Ensure that the input voltage rises monotonically and reaches the UVLO threshold (typically 2.5V) within 10ms. Also, ensure that the input capacitance is sufficient to filter out noise and ripple.
-
The maximum allowed input voltage ripple is 10% of the nominal input voltage. Exceeding this may affect the regulator's stability and performance.
-
Yes, but ensure that the junction temperature (TJ) does not exceed 125°C. Use a suitable heat sink and thermal interface material to maintain a safe operating temperature.
-
Check the PCB layout for noise coupling, ensure proper decoupling, and verify that the output capacitor meets the recommended specifications. Also, check for any voltage drops or noise on the input voltage.