We use Cookies to give you best experience on our website. By using our website and services, you expressly agree to the placement of our performance, functionality and advertising cookies. Please see our Privacy Policy for more information.

Register or Sign In
Microcontrollers and Processors / Microcontrollers / DSPIC30F6014AT-20E/PT
Datasheets
DSPIC30F6014AT-20E/PT by: Microchip Technology Inc

16-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PQFP80, 12 X 12 MM, 1 MM HEIGHT, PLASTIC, MS-026, TQFP-80

Part Details for DSPIC30F6014AT-20E/PT by Microchip Technology Inc

Results Overview of DSPIC30F6014AT-20E/PT by Microchip Technology Inc

Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.

DSPIC30F6014AT-20E/PT Information

DSPIC30F6014AT-20E/PT by Microchip Technology Inc is a Microcontroller.
Microcontrollers are under the broader part category of Microcontrollers and Processors.

Microcontrollers (MCUs) are small, low-power integrated circuits used to control embedded systems. Microcontrollers are primarily used to automate and control devices. Read more about Microcontrollers and Processors on our Microcontrollers and Processors part category page.

Price & Stock for DSPIC30F6014AT-20E/PT

Part # Distributor Description Stock Price Buy
Vyrian Peripheral ICs 1415
RFQ

Part Details for DSPIC30F6014AT-20E/PT

DSPIC30F6014AT-20E/PT CAD Models

There are no models available for this part yet.

Sign in to request this CAD model.

Register or Sign In

DSPIC30F6014AT-20E/PT Part Data Attributes

Parametric Data
DSPIC30F6014AT-20E/PT Microchip Technology Inc
Buy Now Datasheet
Compare Parts:
DSPIC30F6014AT-20E/PT Microchip Technology Inc 16-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PQFP80, 12 X 12 MM, 1 MM HEIGHT, PLASTIC, MS-026, TQFP-80
Select a part to compare:
Pbfree Code Yes
Rohs Code Yes
Part Life Cycle Code Active
Ihs Manufacturer MICROCHIP TECHNOLOGY INC
Part Package Code QFP
Package Description 12 X 12 MM, 1 MM HEIGHT, PLASTIC, MS-026, TQFP-80
Pin Count 80
Reach Compliance Code compliant
ECCN Code 3A991.A.2
HTS Code 8542.31.00.01
Additional Feature ALSO OPERATES AT 3V MINIMUM SUPPLY AT 15 MHZ
Address Bus Width
Barrel Shifter YES
Bit Size 16
Boundary Scan NO
Clock Frequency-Max 40 MHz
External Data Bus Width
Format FIXED POINT
Internal Bus Architecture MULTIPLE
JESD-30 Code S-PQFP-G80
JESD-609 Code e3
Length 12 mm
Low Power Mode YES
Moisture Sensitivity Level 3
Number of Terminals 80
On Chip Program ROM Width 24
Operating Temperature-Max 125 °C
Operating Temperature-Min -40 °C
Package Body Material PLASTIC/EPOXY
Package Code TFQFP
Package Equivalence Code TQFP80,.55SQ
Package Shape SQUARE
Package Style FLATPACK, THIN PROFILE, FINE PITCH
Peak Reflow Temperature (Cel) 260
Qualification Status Not Qualified
ROM Programmability FLASH
Screening Level TS 16949
Seated Height-Max 1.2 mm
Supply Current-Max 180 mA
Supply Voltage-Max 5.5 V
Supply Voltage-Min 2.5 V
Supply Voltage-Nom 5 V
Surface Mount YES
Technology CMOS
Temperature Grade AUTOMOTIVE
Terminal Finish MATTE TIN
Terminal Form GULL WING
Terminal Pitch 0.5 mm
Terminal Position QUAD
Time@Peak Reflow Temperature-Max (s) 40
Width 12 mm
uPs/uCs/Peripheral ICs Type DIGITAL SIGNAL PROCESSOR, CONTROLLER

DSPIC30F6014AT-20E/PT Frequently Asked Questions (FAQ)

  • The maximum clock frequency that can be used with an external crystal oscillator is 40 MHz, as specified in the datasheet. However, it's recommended to use a crystal oscillator with a frequency of 10 MHz or less to ensure reliable operation.

  • To configure the oscillator for optimal performance, ensure that the oscillator pins (OSCI and OSCO) are properly decoupled with capacitors, and the oscillator frequency is within the recommended range. Also, make sure to select the correct oscillator configuration bits in the FOSC register.

  • The maximum current that can be sourced or sunk by the I/O pins is 25 mA, as specified in the datasheet. However, it's recommended to limit the current to 10 mA or less to ensure reliable operation and prevent overheating.

  • To implement a watchdog timer, configure the WDTCON register to enable the watchdog timer, set the watchdog timer period using the WDTPS bits, and clear the watchdog timer using the CLRWDT instruction in your code. Make sure to clear the watchdog timer regularly to prevent a reset.

  • The Brown-Out Reset (BOR) feature is used to reset the microcontroller when the supply voltage falls below a certain threshold (typically 2.5V). This feature helps prevent the microcontroller from operating erratically or unpredictably during power-on or power-down sequences.