Part Details for CDCV857BIDGG by Texas Instruments
Results Overview of CDCV857BIDGG by Texas Instruments
- Distributor Offerings: (8 listings)
- Number of FFF Equivalents: (0 replacements)
- Tariff Estimator: (Available) NEW
- Number of Functional Equivalents: (10 options)
- CAD Models: (Available)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
CDCV857BIDGG Information
CDCV857BIDGG by Texas Instruments is a Clock Driver.
Clock Drivers are under the broader part category of Logic Components.
Digital logic governs the behavior of signals in electronic circuits, enabling complex decisions based on simple binary inputs (yes/no). Logic components perform operations from these signals. Read more about Logic Components on our Logic part category page.
Price & Stock for CDCV857BIDGG
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
DISTI #
85974021
|
Verical | Zero Delay Buffer 10-Out Differential 48-Pin TSSOP Tube RoHS: Compliant Min Qty: 53 Package Multiple: 1 Date Code: 2001 | Americas - 12160 |
|
$5.7500 / $7.1875 | Buy Now |
|
DISTI #
85973807
|
Verical | Zero Delay Buffer 10-Out Differential 48-Pin TSSOP Tube RoHS: Compliant Min Qty: 53 Package Multiple: 1 Date Code: 0601 | Americas - 3328 |
|
$5.7500 / $7.1875 | Buy Now |
|
DISTI #
85972774
|
Verical | Zero Delay Buffer 10-Out Differential 48-Pin TSSOP Tube RoHS: Compliant Min Qty: 53 Package Multiple: 1 Date Code: 1501 | Americas - 2744 |
|
$5.7500 / $7.1875 | Buy Now |
|
DISTI #
85977877
|
Verical | Zero Delay Buffer 10-Out Differential 48-Pin TSSOP Tube RoHS: Compliant Min Qty: 53 Package Multiple: 1 Date Code: 1001 | Americas - 1519 |
|
$5.7500 / $7.1875 | Buy Now |
|
|
Quest Components | 857 SERIES, PLL BASED CLOCK DRIVER, 10 TRUE OUTPUT(S), 0 INVERTED OUTPUT(S), TSSOP-48 | 149 |
|
$4.8690 / $12.1725 | Buy Now |
|
|
Rochester Electronics | PLL Based Clock Driver, 857 Series, 10 True Output(s), 0 Inverted Output(s), PDSO48 RoHS: Compliant Status: Obsolete Min Qty: 1 | 19791 |
|
$4.6000 / $5.7500 | Buy Now |
|
|
ComSIT USA | 2.5-V PHASE-LOCK LOOP CLOCK DRIVER PLL Based Clock Driver, 857 Series, 10 True Output(s), 0 Inverted Output(s), PDSO48 ECCN: EAR99 RoHS: Not Compliant |
|
|
RFQ | |
|
|
Chip Stock | ICPLLCLOCKDRIVER48TSSOP", PLLClockDriverIC200MHz148-TFSOP(0.240", ", ,6.10mmWidth)", | 254 |
|
RFQ |
US Tariff Estimator: CDCV857BIDGG by Texas Instruments
Calculations from this tool are estimations only for imports into the United States. Please refer to the distributor or manufacturer and reference official US government sources and authorities to verify any final purchase costs.
Part Details for CDCV857BIDGG
CDCV857BIDGG CAD Models
-
Part Symbol
-
Footprint
-
3D Model
Available Download Formats
By downloading CAD models, you agree to our Terms & Conditions and Privacy Policy
CDCV857BIDGG Part Data Attributes
|
|
CDCV857BIDGG
Texas Instruments
Buy Now
Datasheet
|
Compare Parts:
CDCV857BIDGG
Texas Instruments
2.5-V phase-lock loop clock driver 48-TSSOP -40 to 85
|
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Part Package Code | TSSOP | |
| Package Description | Tssop-48 | |
| Pin Count | 48 | |
| Reach Compliance Code | Compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.39.00.01 | |
| Family | 857 | |
| Input Conditioning | Differential | |
| JESD-30 Code | R-PDSO-G48 | |
| JESD-609 Code | e4 | |
| Length | 12.5 Mm | |
| Load Capacitance (CL) | 14 Pf | |
| Logic IC Type | Pll Based Clock Driver | |
| Max I(ol) | 0.012 A | |
| Moisture Sensitivity Level | 2 | |
| Number of Functions | 1 | |
| Number of Inverted Outputs | ||
| Number of Terminals | 48 | |
| Number of True Outputs | 10 | |
| Operating Temperature-Max | 85 °C | |
| Operating Temperature-Min | -40 °C | |
| Output Characteristics | 3-State | |
| Package Body Material | Plastic/Epoxy | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP48,.3,20 | |
| Package Shape | Rectangular | |
| Package Style | Small Outline, Thin Profile, Shrink Pitch | |
| Packing Method | Tube | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power Supply Current-Max (ICC) | 12 Ma | |
| Qualification Status | Not Qualified | |
| Same Edge Skew-Max (tskwd) | 0.1 Ns | |
| Seated Height-Max | 1.2 Mm | |
| Supply Voltage-Max (Vsup) | 2.7 V | |
| Supply Voltage-Min (Vsup) | 2.3 V | |
| Supply Voltage-Nom (Vsup) | 2.5 V | |
| Surface Mount | Yes | |
| Temperature Grade | Industrial | |
| Terminal Finish | Nickel Palladium Gold | |
| Terminal Form | Gull Wing | |
| Terminal Pitch | 0.5 Mm | |
| Terminal Position | Dual | |
| Time@Peak Reflow Temperature-Max (s) | 30 | |
| Width | 6.1 Mm | |
| fmax-Min | 200 Mhz |
Alternate Parts for CDCV857BIDGG
This table gives cross-reference parts and alternative options found for CDCV857BIDGG. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of CDCV857BIDGG, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| CDCV857BDGGR | Texas Instruments | Check for Price | 2.5 V Phase Lock Loop DDR Clock Driver 48-TSSOP 0 to 70 | CDCV857BIDGG vs CDCV857BDGGR |
| ICS854S202AYI-01 | Integrated Device Technology Inc | Check for Price | Low Skew Clock Driver, 854S Series, 2 True Output(s), 0 Inverted Output(s), PQFP48, 7 X 7 MM, 1.40 MM HEIGHT, MS-026, LQFP-48 | CDCV857BIDGG vs ICS854S202AYI-01 |
| CY7B994V-5AXIT | Cypress Semiconductor | Check for Price | PLL Based Clock Driver, 7B Series, 16 True Output(s), 0 Inverted Output(s), PQFP100, TQFP-100 | CDCV857BIDGG vs CY7B994V-5AXIT |
| 9DB102BGILFT | Renesas Electronics Corporation | Check for Price | 2-output Differential Buffer for PCIe Gen2, TSSOP0/Reel | CDCV857BIDGG vs 9DB102BGILFT |
| CDCV857BDGGG4 | Texas Instruments | Check for Price | 2.5 V Phase Lock Loop DDR Clock Driver 48-TSSOP 0 to 70 | CDCV857BIDGG vs CDCV857BDGGG4 |
| ICS854S013IT | Integrated Device Technology Inc | Check for Price | Low Skew Clock Driver, 854S Series, 3 True Output(s), 0 Inverted Output(s), PDSO20, 6.50 X 4.40 MM, 0.92 MM HEIGHT, MS-153, TSSOP-20 | CDCV857BIDGG vs ICS854S013IT |
| 854S14AKT | Integrated Device Technology Inc | Check for Price | Low Skew Clock Driver, 854S Series, 4 True Output(s), 0 Inverted Output(s), 4 X 4 MM, 0.95 MM HEIGHT, MO-220, VQFN-24 | CDCV857BIDGG vs 854S14AKT |
| IDTCSP5810PY | Integrated Device Technology Inc | Check for Price | Low Skew Clock Driver, 10 True Output(s), 0 Inverted Output(s), PDSO28, SSOP-28 | CDCV857BIDGG vs IDTCSP5810PY |
| 9DB102BGLF | Integrated Device Technology Inc | Check for Price | TSSOP-20, Tube | CDCV857BIDGG vs 9DB102BGLF |
| CY7B994V-5AI | Cypress Semiconductor | Check for Price | PLL Based Clock Driver, 7B Series, 16 True Output(s), 0 Inverted Output(s), TTL, PQFP100, PLASTIC, TQFP-100 | CDCV857BIDGG vs CY7B994V-5AI |
CDCV857BIDGG Frequently Asked Questions (FAQ)
-
The recommended power-up sequence is to apply VCC first, followed by VDD, and then the input clock signal. This ensures proper initialization and prevents potential latch-up conditions.
-
When the input clock signal is not present, the output clock signal will be in a high-impedance state. It's recommended to use a pull-down resistor or a clock buffer with a built-in pull-down to ensure a stable output clock signal.
-
The maximum input clock frequency is 200 MHz, but it's recommended to derate the frequency based on the specific application and operating conditions to ensure reliable operation.
-
While the CDCV857BIDGG is designed for a fanout of up to 7, it's possible to use it with a higher fanout by adding external buffers or repeaters. However, this may impact the signal integrity and jitter performance.
-
The optimal value for the output clock signal termination resistor depends on the specific application, PCB layout, and signal integrity requirements. A good starting point is to use a 50-ohm resistor, but it may need to be adjusted based on simulation and measurement results.