Part Details for BYT60P-1000 by STMicroelectronics
Results Overview of BYT60P-1000 by STMicroelectronics
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (10 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Space Technology
Aerospace and Defense
Energy and Power Systems
BYT60P-1000 Information
BYT60P-1000 by STMicroelectronics is a Rectifier Diode.
Rectifier Diodes are under the broader part category of Diodes.
A diode is a electrical part that can control the direction in which the current flows in a device. Consider factors like voltage drop, current capacity, reverse voltage, and operating frequency when selecting a diode. Read more about Diodes on our Diodes part category page.
Available Datasheets
| Part # | Manufacturer | Description | Datasheet |
|---|---|---|---|
| ST1000GXH35 | Toshiba Electronic Devices & Storage Corporation | IEGT, 4500 V, 1000 A, 2-120B1S |
Part Details for BYT60P-1000
BYT60P-1000 CAD Models
BYT60P-1000 Part Data Attributes
|
|
BYT60P-1000
STMicroelectronics
Buy Now
Datasheet
|
Compare Parts:
BYT60P-1000
STMicroelectronics
60A, 1000V, SILICON, RECTIFIER DIODE, PLASTIC PACKAGE-2
Select a part to compare: |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | STMICROELECTRONICS | |
| Package Description | PLASTIC PACKAGE-2 | |
| Pin Count | 2 | |
| Reach Compliance Code | not_compliant | |
| ECCN Code | EAR99 | |
| HTS Code | 8541.10.00.80 | |
| Samacsys Manufacturer | STMicroelectronics | |
| Application | FAST RECOVERY | |
| Configuration | SINGLE | |
| Diode Element Material | SILICON | |
| Diode Type | RECTIFIER DIODE | |
| Forward Voltage-Max (VF) | 1.8 V | |
| JESD-30 Code | R-PSFM-T2 | |
| JESD-609 Code | e3 | |
| Non-rep Pk Forward Current-Max | 400 A | |
| Number of Elements | 1 | |
| Number of Phases | 1 | |
| Number of Terminals | 2 | |
| Operating Temperature-Max | 150 °C | |
| Output Current-Max | 60 A | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Shape | RECTANGULAR | |
| Package Style | FLANGE MOUNT | |
| Qualification Status | Not Qualified | |
| Rep Pk Reverse Voltage-Max | 1000 V | |
| Reverse Recovery Time-Max | 0.17 µs | |
| Surface Mount | NO | |
| Terminal Finish | MATTE TIN | |
| Terminal Form | THROUGH-HOLE | |
| Terminal Position | SINGLE |
Alternate Parts for BYT60P-1000
This table gives cross-reference parts and alternative options found for BYT60P-1000. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of BYT60P-1000, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| RURG50100 | Intersil Corporation | Check for Price | 50A, 1000V, SILICON, RECTIFIER DIODE | BYT60P-1000 vs RURG50100 |
BYT60P-1000 Frequently Asked Questions (FAQ)
-
The BYT60P-1000 can withstand a maximum surge current of 100A for 10ms, as per the IEC 61000-4-5 standard.
-
To ensure proper cooling, the BYT60P-1000 should be mounted on a heat sink with a thermal resistance of less than 10°C/W. Additionally, the ambient temperature should be kept below 50°C.
-
The recommended PCB layout for the BYT60P-1000 involves placing the device near the power source, using a solid ground plane, and keeping the high-current paths as short as possible.
-
Yes, the BYT60P-1000 can be used in parallel to increase the current rating, but it is essential to ensure that the devices are properly matched and that the current sharing is balanced.
-
The derating curve for the BYT60P-1000 is typically provided in the application notes or can be obtained from STMicroelectronics' technical support. It provides the maximum allowable current at different ambient temperatures.