Part Details for AD8605ACB-REEL7 by Analog Devices Inc
Results Overview of AD8605ACB-REEL7 by Analog Devices Inc
- Distributor Offerings: (2 listings)
- Number of FFF Equivalents: (1 replacement)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (8 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
AD8605ACB-REEL7 Information
AD8605ACB-REEL7 by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Price & Stock for AD8605ACB-REEL7
| Part # | Distributor | Description | Stock | Price | Buy | |
|---|---|---|---|---|---|---|
|
|
Chip 1 Exchange | INSTOCK | 18468 |
|
RFQ | |
|
|
Win Source Electronics | Precision Low noise CMOS Rail-to-Rail Input/Output Operational Amplifiers / Op Amp Single Low Noise ... more | 8000 |
|
$2.2173 / $3.3258 | Buy Now |
Part Details for AD8605ACB-REEL7
AD8605ACB-REEL7 CAD Models
AD8605ACB-REEL7 Part Data Attributes
|
|
AD8605ACB-REEL7
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD8605ACB-REEL7
Analog Devices Inc
IC OP-AMP, 750 uV OFFSET-MAX, 9 MHz BAND WIDTH, PBGA5, WLCSP-5, Operational Amplifier
Select a part to compare: |
| Pbfree Code | No | |
| Rohs Code | No | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | BGA | |
| Package Description | WLCSP-5 | |
| Pin Count | 5 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Samacsys Manufacturer | Analog Devices | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | VOLTAGE-FEEDBACK | |
| Average Bias Current-Max (IIB) | 0.00025 µA | |
| Bias Current-Max (IIB) @25C | 0.000001 µA | |
| Common-mode Reject Ratio-Nom | 85 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 750 µV | |
| JESD-30 Code | R-PBGA-B5 | |
| JESD-609 Code | e0 | |
| Length | 1.29 mm | |
| Low-Bias | YES | |
| Low-Offset | YES | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 5 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | VFBGA | |
| Package Equivalence Code | BGA5,3X3,17/10 | |
| Package Shape | RECTANGULAR | |
| Package Style | GRID ARRAY, VERY THIN PROFILE, FINE PITCH | |
| Packing Method | TR, 7 INCH | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 0.5 mm | |
| Slew Rate-Nom | 5 V/us | |
| Supply Current-Max | 1.5 mA | |
| Supply Voltage Limit-Max | 6 V | |
| Supply Voltage-Nom (Vsup) | 2.7 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | TIN LEAD | |
| Terminal Form | BALL | |
| Terminal Pitch | 0.5 mm | |
| Terminal Position | BOTTOM | |
| Unity Gain BW-Nom | 9000 | |
| Voltage Gain-Min | 110000 | |
| Width | 0.9 mm |
Alternate Parts for AD8605ACB-REEL7
This table gives cross-reference parts and alternative options found for AD8605ACB-REEL7. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD8605ACB-REEL7, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD8605ACB-REEL7 | Rochester Electronics LLC | Check for Price | OP-AMP, 750uV OFFSET-MAX, 9MHz BAND WIDTH, PBGA5, WLCSP-5 | AD8605ACB-REEL7 vs AD8605ACB-REEL7 |
AD8605ACB-REEL7 Frequently Asked Questions (FAQ)
-
A good PCB layout for the AD8605 involves keeping the input and output traces short and away from noise sources, using a solid ground plane, and decoupling the power supply pins with capacitors. A 4-layer PCB with a dedicated analog ground plane is recommended.
-
The gain resistor (Rg) value depends on the desired gain and the input impedance of the circuit. A higher Rg value results in higher gain, but also increases noise and input impedance. A good starting point is to use the recommended Rg value in the datasheet and adjust based on the specific application requirements.
-
The maximum power dissipation of the AD8605 is dependent on the package type and ambient temperature. For the CB (SOIC) package, the maximum power dissipation is 670mW at 25°C ambient temperature. However, it's recommended to derate the power dissipation based on the operating temperature and other environmental factors.
-
Yes, the AD8605 can be used as a single-ended amplifier by tying the negative input to ground or a fixed voltage. However, this will reduce the common-mode rejection ratio (CMRR) and increase the noise. It's recommended to use the AD8605 in a differential configuration for optimal performance.
-
To protect the AD8605 from EMI, use a shielded enclosure, keep the input and output traces short, and use a common-mode choke or ferrite bead on the input lines. Additionally, use a low-pass filter or a shielded cable to connect the input signals to the AD8605.