Part Details for AD8551ARMZ-R2 by Analog Devices Inc
Results Overview of AD8551ARMZ-R2 by Analog Devices Inc
- Distributor Offerings: (0 listings)
- Number of FFF Equivalents: (0 replacements)
- CAD Models: (Request Part)
- Number of Functional Equivalents: (4 options)
- Part Data Attributes: (Available)
- Reference Designs: (Not Available)
Tip: Data for a part may vary between manufacturers. You can filter for manufacturers on the top of the page next to the part image and part number.
Applications
Education and Research
Internet of Things (IoT)
Computing and Data Storage
Aerospace and Defense
Healthcare
Telecommunications
Automotive
AD8551ARMZ-R2 Information
AD8551ARMZ-R2 by Analog Devices Inc is an Operational Amplifier.
Operational Amplifiers are under the broader part category of Amplifier Circuits.
Amplifier circuits use external power to increase the amplitude of an input signal. They can be used to perform linear amplifications or logarithmic functions. Read more about Amplifier Circuits on our Amplifier Circuits part category page.
Part Details for AD8551ARMZ-R2
AD8551ARMZ-R2 CAD Models
AD8551ARMZ-R2 Part Data Attributes
|
|
AD8551ARMZ-R2
Analog Devices Inc
Buy Now
Datasheet
|
Compare Parts:
AD8551ARMZ-R2
Analog Devices Inc
IC OP-AMP, 10 uV OFFSET-MAX, 1.5 MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, MO-187AA, MSOP-8, Operational Amplifier
Select a part to compare: |
| Pbfree Code | Yes | |
| Rohs Code | Yes | |
| Part Life Cycle Code | Obsolete | |
| Ihs Manufacturer | ANALOG DEVICES INC | |
| Part Package Code | TSSOP | |
| Package Description | ROHS COMPLIANT, MO-187AA, MSOP-8 | |
| Pin Count | 8 | |
| Reach Compliance Code | unknown | |
| ECCN Code | EAR99 | |
| HTS Code | 8542.33.00.01 | |
| Amplifier Type | OPERATIONAL AMPLIFIER | |
| Architecture | CHOPPER-STAB | |
| Average Bias Current-Max (IIB) | 0.0015 µA | |
| Bias Current-Max (IIB) @25C | 0.00005 µA | |
| Common-mode Reject Ratio-Nom | 130 dB | |
| Frequency Compensation | YES | |
| Input Offset Voltage-Max | 10 µV | |
| JESD-30 Code | S-PDSO-G8 | |
| JESD-609 Code | e3 | |
| Length | 3 mm | |
| Low-Bias | YES | |
| Low-Offset | YES | |
| Micropower | NO | |
| Moisture Sensitivity Level | 1 | |
| Number of Functions | 1 | |
| Number of Terminals | 8 | |
| Operating Temperature-Max | 125 °C | |
| Operating Temperature-Min | -40 °C | |
| Package Body Material | PLASTIC/EPOXY | |
| Package Code | TSSOP | |
| Package Equivalence Code | TSSOP8,.19 | |
| Package Shape | SQUARE | |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH | |
| Packing Method | TAPE AND REEL | |
| Peak Reflow Temperature (Cel) | 260 | |
| Power | NO | |
| Programmable Power | NO | |
| Qualification Status | Not Qualified | |
| Seated Height-Max | 1.1 mm | |
| Slew Rate-Nom | 0.4 V/us | |
| Supply Current-Max | 1.07 mA | |
| Supply Voltage Limit-Max | 6 V | |
| Supply Voltage-Nom (Vsup) | 5 V | |
| Surface Mount | YES | |
| Technology | CMOS | |
| Temperature Grade | AUTOMOTIVE | |
| Terminal Finish | Matte Tin (Sn) - annealed | |
| Terminal Form | GULL WING | |
| Terminal Pitch | 0.65 mm | |
| Terminal Position | DUAL | |
| Unity Gain BW-Nom | 1500 | |
| Voltage Gain-Min | 178000 | |
| Wideband | NO | |
| Width | 3 mm |
Alternate Parts for AD8551ARMZ-R2
This table gives cross-reference parts and alternative options found for AD8551ARMZ-R2. The Form Fit Function (FFF) tab will give you the options that are more likely to serve as direct pin-to-pin alternates or drop-in parts. The Functional Equivalents tab will give you options that are likely to match the same function of AD8551ARMZ-R2, but it may not fit your design. Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.
| Part Number | Manufacturer | Composite Price | Description | Compare |
|---|---|---|---|---|
| AD8551ARMZ | Analog Devices Inc | $2.9589 | Zero-Drift, Single-Supply, RRIO Single Op Amp | AD8551ARMZ-R2 vs AD8551ARMZ |
| AD8551ARM-REEL | Analog Devices Inc | Check for Price | Zero-Drift, Single-Supply, RRIO Single Op Amp | AD8551ARMZ-R2 vs AD8551ARM-REEL |
| AD8551ARM-R2 | Analog Devices Inc | Check for Price | IC OP-AMP, 10 uV OFFSET-MAX, 1.5 MHz BAND WIDTH, PDSO8, MO-187AA, MSOP-8, Operational Amplifier | AD8551ARMZ-R2 vs AD8551ARM-R2 |
| AD8551ARMZ-REEL | Rochester Electronics LLC | Check for Price | OP-AMP, 10 uV OFFSET-MAX, 1.5 MHz BAND WIDTH, PDSO8, ROHS COMPLIANT, MO-187AA, MSOP-8 | AD8551ARMZ-R2 vs AD8551ARMZ-REEL |
AD8551ARMZ-R2 Frequently Asked Questions (FAQ)
-
The AD8551ARMZ-R2 is a high-precision, low-noise amplifier, and proper layout and placement are crucial to achieve optimal performance. It is recommended to follow the layout guidelines provided in the datasheet, including keeping the input and output traces short and away from noise sources, using a solid ground plane, and placing decoupling capacitors close to the device.
-
The AD8551ARMZ-R2 is specified to operate from -40°C to 125°C. To ensure the device operates within this range, it is recommended to provide adequate heat sinking, avoid exposing the device to extreme temperatures during storage or handling, and consider using thermal management techniques such as heat sinks or thermal interfaces in the system design.
-
The recommended power-up sequence for the AD8551ARMZ-R2 is to apply the power supplies (VCC and VEE) simultaneously, with VCC rising first. This helps prevent damage or latch-up due to incorrect power-up sequencing. It is also recommended to ensure that the input signals are within the specified range during power-up.
-
To troubleshoot common issues such as oscillations or instability with the AD8551ARMZ-R2, it is recommended to check the layout and placement of the device, ensure that the input and output impedances are matched, and verify that the power supplies are clean and well-regulated. Additionally, checking the device's operating conditions, such as temperature and voltage, can help identify the root cause of the issue.
-
The AD8551ARMZ-R2 is a sensitive device and requires proper ESD protection and handling procedures to prevent damage. It is recommended to handle the device by the body, avoid touching the pins, use ESD-safe materials and tools, and follow proper grounding procedures during assembly and testing.